Carmarthenshire · Wales
Bath re-enamelling & resurfacing in Pontamman, Carmarthenshire
Full bath re-enamelling and resurfacing for homes and businesses in Pontamman and across Carmarthenshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Several chips and rust patches
Bath re-enamelling in Pontamman, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you’re dealing with a coloured bath you want in white and brown or grey marks that don’t clean off, we can usually put it right, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Pontamman (SA18)
- Region
- Carmarthenshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Pontamman
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
You may need us if you’ve spotted any of these:
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
- Wear marks under the taps
- A period or roll-top bath worth keeping
What your quote should include
- How long it needs to cure
- Who will actually do the work
- The length of the guarantee and what it covers
- What happens if the damage is worse than the pictures show
Towns and villages near Pontamman
More services for Pontamman
What happens on the day
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Getting a price
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Pontamman. The price reflects:
- How hard the colour is to match
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
Our prices are the same across the UK, with no extra for Pontamman. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- Details of any past repairs
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Pontamman and nearby
Pontamman is about 1 mile east of Ammanford, in Carmarthenshire. From the centre of Pontamman to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Pontamman is one of 195 towns and villages in Carmarthenshire we cover.
We cover every part of the SA18 postcode area and the streets around it. Whether you live on Foundry Road, Wernoleu Road and Wern-Ddu Road or anywhere nearby, we can come to you. Main roads around Pontamman include the A474, so getting to you is simple. Other places close to Pontamman include Wernolau (1 mile north), Hopkinstown (1 mile east), Betws (1 mile south-west), Ammanford (1 mile west) and Tir-y-dail (1 mile west). Within a short drive, we also cover Llanelli (11 miles south-west), Carmarthen (15 miles west), Llanelli Rural (11 miles south-west), Bigyn (11 miles south-west), Wern (11 miles south-west) and Box (11 miles south-west).
Near you in Pontamman
Typical jobs here are in homes near Gwynfryn College, St David's Parish Church and Ammanford Hotel. For rail, the closest station is Ammanford station, roughly 1.3 miles west of the centre. A little further out are Bro Aman Museum (0.9 miles west) and Tir-y-Dail Motte and Bailey Castle (1.2 miles west). For a walk, there’s Llyn Llech Owain and Mynydd y Gwair.
For landlords and businesses
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- A quick wipe after use keeps limescale away
- Repair dripping taps early
- Do not leave a chip unrepaired
- Do not use the bath until it has fully cured
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Common questions in Pontamman
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
About our accreditations · Every repair comes with a one-year guarantee.
