Devon · England

Bath re-enamelling & resurfacing in Weston, Devon

Full bath re-enamelling and resurfacing for homes and businesses in Weston and across Devon. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Weston homes

About our bath re-enamelling in Weston

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people get in touch are chips and rust in more than one place and a period or roll-top bath worth keeping.

Every repair is covered by a one-year guarantee.

Area
Weston (EX10)
Region
Devon
Warranty
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

What we’re called out for in Weston

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.

Most people contact us after spotting something like this:

  • A bath in a colour that no longer suits
  • A dull, rough surface that will not come clean
  • Brown or grey marks that do not clean off
  • An old resurfacing that’s failing

Comparing quotes

  • The length of the guarantee and what it covers
  • What happens if the damage is worse than the pictures show
  • What preparation is included
  • How the colour is matched

10 questions to ask before booking

The process

Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Tell us if there are stairs or a lift
  • Keep a parking space free if you can

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

Get a free quote

Read more

When a repair isn’t the answer

In fairness, there are a few things a repair will not fix:

  • Damage hidden under a previous coating, until it’s stripped back
  • A cast iron or steel bath that is cracked right through
  • Acrylic that moves when you stand in it

If in doubt, send photos and we will say what we think.

Materials we work on in Weston

  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops

Prices and what affects them

Prices start from £350. We charge the same across the UK, including Weston. The price reflects:

  • Where the damage is and how we get to it
  • How much damage there is
  • How hard the colour is to match
  • The material and finish

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

How to get a fixed price

When you take your pictures, these tips help us give you a firm price:

  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • A clear, close picture of the problem area
  • Any details about the material

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

Our work in Weston

Weston is about 3 miles east of Sidmouth, in Devon. Whether you are in the middle of Weston or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 586 places in Devon, from the larger towns to small villages.

Jobs in EX10 are booked in the same way as anywhere else. That includes homes on Grammar Lane and Slade Lane. Close by, we cover Salcombe Regis (1 mile west), Harcombe (1 mile north-west), Street (1 mile east), Branscombe (2 miles east) and Sidford (2 miles west). We also work in nearby towns such as Exeter (15 miles west), Exmouth (11 miles south-west), Sidmouth (3 miles west), Honiton (7 miles north), Dawlish (15 miles south-west) and Larkbeare (15 miles west).

What’s near Weston

Locally, our jobs take us to homes close to Sidmouth College and Church of St Mary and St Peter. Further afield, we also cover the area around Sidmouth Hospital (2.8 miles west) and Sidmouth Toy & Model Museum (2.8 miles south-west). Not far away are Peak Hill.

Map of Weston © OpenStreetMap contributors

Work for landlords and builders

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Have chips seen to early
  • Use washing-up liquid and a soft cloth
  • Fix dripping taps quickly
  • Don’t use the bath until it has fully cured

The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Your questions about bath re-enamelling in Weston

Does re-enamelling smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Are there extra charges for Weston?

No. Our quotes include travel, with the same prices everywhere we work.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Do you cover Weston?

Yes, we do. We send a technician to Weston for every job, with no extra charge for travel.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Will the price change on the day?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

What happens next?

We review the photos and send a fixed quote with dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.