Devon · England
Bath re-enamelling & resurfacing in Street, Devon
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Street. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- Chips and rust in more than one place
How the visit works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to the best part of a day.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep children and pets away from the room on the day
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Advice
How we handle bath re-enamelling in Street
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you are dealing with thin, worn enamel in places and a period or roll-top bath worth keeping, we can help.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Street (EX12)
- Region
- Devon
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Street
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Keep an eye out for these signs:
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
- A roll-top that is seen better days
Comparing quotes
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- What prep work is covered
- When it can be used again
Landlords, agents and businesses in Street
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
If you manage property in Street, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
When a repair isn’t the answer
In fairness, some problems need a different fix:
- Holes rusted through the metal
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Street
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Questions from Street
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Devon.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
How much does bath re-enamelling cost in Street?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Places near Street
Other services in Street
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Why Street clients choose us
- A fixed quote before booking
- We will tell you if it’s not worth repairing
- Everything repaired in place
- One-year guarantee on every repair
Read our pricing or bath cost comparison.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Stick to gentle, non-abrasive cleaners
- Don’t leave bottles, razors or sponges standing on the surface
- Have chips seen to early
- Repair dripping taps early
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Our work in Street
Street is about 4 miles east of Sidmouth, in Devon. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Street is one of 586 towns and villages in Devon we cover.
We work across EX12 and the streets around it. Nearby, we also work in Branscombe (1 mile east), Weston (1 mile west), Harcombe (2 miles north-west), Salcombe Regis (2 miles west) and Beer (2 miles east). We also work in nearby towns such as Exmouth (12 miles south-west), Sidmouth (4 miles west), Honiton (7 miles north), Cullompton (15 miles north-west), Seaton (4 miles east) and Cranbrook (12 miles west).
Around Street
Our customers here include homes close to Fountain Head pub, St Winifred's Church and Branscombe Church of England Primary School. A little further out are Sidmouth Hospital (4 miles west) and Axe Valley Heritage Museum (3.7 miles east). For a walk, there’s Peak Hill.
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before booking. We look at:
- The colour and finish to match
- How many items we do on one visit
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- One sharp close-up of the damage
- The material, if you know it
- Whether it’s been repaired or coated before
- Something in shot to show the size
If you are in Street and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
