Devon · England
Bath Re-enamelling for Branscombe homes
Our repair technicians come to Branscombe for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that don’t clean off
About our bath re-enamelling in Branscombe
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Common call-outs are for wear marks under the taps and brown or grey marks that don’t clean off, in cast iron baths, Victorian roll-tops and acrylic baths.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Branscombe (EX12)
- Area hub
- Devon
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
Arrival times are agreed in advance. On site, it takes a full day in most cases. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Read more
Keeping it looking good
Simple care helps the repair last. We recommend:
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs immediately
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
When a repair is not the answer
Before you book, it’s worth knowing the limits too:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Repairing versus replacing in Branscombe
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- We’ll tell you if it’s not worth repairing
- A fixed quote before you book
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
Read our full price list and bath cost comparison.
Common questions in Branscombe
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote and the next dates we have.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Do you come to Branscombe?
Yes. We work across the UK and come to Branscombe. Send pictures and we will quote, or call 0345 017 0787.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Where we work around Branscombe
Branscombe is about 4 miles east of Sidmouth, in Devon. From the centre of Branscombe to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 586 towns and villages across Devon.
Our visits in EX12 work the same way as everywhere else we cover. Local streets include Locksey's Lane, Northern Lane and Mill Lane. We also cover the places around Branscombe: Street (1 mile west), Beer (2 miles east), Weston (2 miles west), Harcombe (3 miles north-west) and Salcombe Regis (3 miles west). We also work in nearby towns such as Exmouth (12 miles west), Sidmouth (4 miles west), Honiton (8 miles north), Cranbrook (12 miles west), Axminster (9 miles north-east) and Budleigh Salterton (9 miles south-west).
Near you in Branscombe
Our clients here include homes close to Branscombe Church of England Primary School, St Winifred's Church and Fountain Head pub, among other places. Further afield, we also cover the area around Colcombe Castle (4.9 miles north-east) and Axe Valley Heritage Museum (3.1 miles east).
Do you need bath re-enamelling in Branscombe?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Keep an eye out for these signs:
- Chips and rust in more than one place
- An old resurfacing that’s failing
- Thin, worn enamel in places
- An outdated colour you’d like to change
Comparing quotes
- How the room is protected while they work
- How long it needs to cure
- Who will actually do the work
- How long the guarantee is and what it covers
What affects the price in Branscombe
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- How easy the damage is to reach
- How many areas need work
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Getting a price from pictures
You can normally get a fixed quote without us visiting. To make it quick:
- Something in shot to show the size
- One picture of the whole bath
- Natural light rather than flash
- Your postcode, so we can check dates
For a price in Branscombe, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What else we do in Branscombe
About our accreditations · Every repair comes with a one-year guarantee.
