Somerset · England
Bath Re-enamelling in Westport
Bath re-enamelling in Westport without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Stains that won’t shift
- Wear marks under the taps
How we handle bath re-enamelling in Westport
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a bath that stays dull however much you clean it and several chips and rust patches, we can normally put it right, whatever the material.
Big or small, you get the same one-year guarantee.
- Where
- Westport (TA10)
- County
- Somerset
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Aftercare tips
After the repair has cured, a few habits help it last:
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
- Never use suction bath mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Covering Westport
Westport is about 8 miles north-east of Chard, in Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover 640 places in Somerset, from the larger towns to small villages.
Jobs in TA10 are booked in the same way as anywhere else. Nearby, we also work in Puckington (1 mile south-west), Barrington (1 mile south-east), Hambridge (1 mile north-east), Stocklinch (2 miles south) and West Lambrook (2 miles east). Larger places within reach include Taunton (10 miles west), Bridgwater (12 miles north-west), Yeovil (10 miles east), Chard (8 miles south-west), Wellington (15 miles west) and Street (12 miles north-east).
Near you in Westport
Typical jobs here are in homes near Church of St James the Less and Hambridge Community Primary School, among other places. Open spaces near Westport include Swell Wood RSPB Nature Reserve.
Your questions about bath re-enamelling in Westport
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.
What happens once I’ve sent pictures?
You’ll get a fixed quote back. There is no obligation to book.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you cover Westport?
Yes. We work across the UK and travel to Westport and the rest of Somerset. Send us photos for a fixed quote, or call 0345 017 0787.
How long is the bath unusable?
One day for most baths, ready the day after. We give you timings with the quote.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What affects the price in Westport
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- Any earlier repairs that need removing first
- How much damage there is
- How many items we do on one visit
- The type of damage
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
How to get a fixed quote
We price nearly every job from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- The material, if you know it
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Email us a picture of the damage and one of the entire item, and tell us you’re in Westport, and we will come back with a fixed quote.
Common problems we fix in Westport
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted any of these:
- Wear marks under the taps
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- Stains that won’t shift
What to look for in a quote
- The length of the guarantee and what it covers
- How soon you can use it again
- What prep work is covered
- How the room is protected while they work
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the next day. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Colour-matched on site
- We come to you, anywhere in the UK
- No need to remove anything
- A fixed quote before booking
Read our pricing and guide to resurfacing and replacement costs.
Towns and villages near Westport
What else we do in Westport
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know if it has been repaired before
- Clear the area around the damage
- Let the surface dry out before the visit
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Related advice
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
