Dorset · England

Bath Re-enamelling in Whitcombe

Damaged bath in Whitcombe? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Whitcombe?

Bath re-enamelling in Whitcombe without replacing anything

We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, and can be used again the following day. Whether it’s an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean, we can help, whatever the material.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Location
Whitcombe (DT9)
Region
Dorset
Cover
One year on every repair
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

How the visit works

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes the best part of a day. We clean up when we’re done and let you know when you can use it again.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Let us know about parking or access
  • Keep children and pets away from the room on the day

Ask for a price

To get a price, send two or three photos through our quote form or ring us. We’ll say immediately if a repair is the right fix.

Send pictures for a quote

Related advice

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Repairs by material

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

Your questions about bath re-enamelling in Whitcombe

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

How do I book?

Send photos through the quote form or call 0345 017 0787.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Will the bath be moved?

No. We resurface it in place, so the tiles and taps stay put.

How long is the bath unusable?

Most baths are done in a day and can be used the day after. We will confirm timings when we quote.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What areas do you cover?

All of Dorset, and the rest of the UK. Travel is included in the price.

When to call us in Whitcombe

Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.

Most people contact us after spotting something like this:

  • Brown or grey marks that do not clean off
  • An outdated colour you’d like to change
  • A peeling or bubbling previous coating
  • Several chips and rust patches

Before booking anyone

  • Aftercare advice
  • What the guarantee covers, and for how long
  • Whether the price covers travel
  • When it can be used again

10 questions to ask before booking

How to care for the repair

Aftercare is simple, and it makes a real difference:

  • Keep toiletries on a shelf rather than in the bath
  • A quick wipe after use keeps limescale away
  • Avoid suction-cup mats
  • A dripping tap should be fixed promptly

Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

What a repair cannot fix

In fairness, there are a few things a repair will not fix:

  • Plumbing leaks, which need a plumber
  • Holes rusted through the metal
  • Damage hidden under a previous coating, until it’s stripped back

If in doubt, send photos and we’ll say what we think.

What we work on

  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Whitcombe and nearby

Whitcombe is about 7 miles north-east of Yeovil, in Dorset. We travel to homes and businesses in Whitcombe and nearby villages, so nothing has to leave your home. We work in 462 places in Dorset.

We work across the DT9 postcode area. If you’re just outside Whitcombe, we cover Sutton Montis (1 mile north-west), South Cadbury (1 mile north), Compton Pauncefoot (2 miles north-east), Sparkford (2 miles north-west) and North Cadbury (2 miles north). Within a short drive, we also cover Gillingham (11 miles east), Shaftesbury (15 miles east), Sherborne (4 miles south), Peacemarsh (11 miles east), Sturminster Newton (11 miles south-east) and Milborne Port (4 miles south-east).

What’s near Whitcombe

In Whitcombe, that means homes near Church of St Andrew and The Queens Arms, among other places. The nearest railway station is Sherborne station, about 4.7 miles south of the centre. A little further out are Sherborne Old Castle (4.4 miles south) and Haynes Motor Museum (2.5 miles north-west).

Map of Whitcombe © OpenStreetMap contributors

Why repair rather than replace?

If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Why choose Surface Doctor in Whitcombe

  • One price list for the whole UK
  • CHAS, Constructionline and SafeContractor accredited
  • Straight answers about what a repair can do
  • Dust sheets down, tidy finish

See our pricing and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.