Somerset · England
Bath Re-enamelling for Lambrook homes
Our repair technicians come to Lambrook for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
How we handle bath re-enamelling in Lambrook
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include staining under the taps and around the waste and worn patches where water runs and sits, on Victorian roll-tops, acrylic baths and basins & shower trays.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Area
- Lambrook (BA22)
- County
- Somerset
- Cover
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Lambrook
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
Common reasons people in Lambrook contact us are:
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- An old resurfacing that’s failing
- A roll-top that’s seen better days
What your quote should include
- Whether the colour is mixed to match
- Aftercare advice
- When it can be used again
- What the guarantee covers, and for how long
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Clear the area around the damage
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Read more
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price depends on:
- Where the damage is and how we get to it
- What the surface is made of
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Photographing the damage takes a minute. Please include:
- One picture of the entire bath
- The material, if you know it
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
Send us a photo of the damage and a wider shot of the whole item, and tell us you’re in Lambrook, and we’ll reply with a fixed quote.
Repairing versus replacing in Lambrook
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- Free fixed quotes from pictures
- One price list for the whole UK
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or guide to resurfacing and replacement costs.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Do not use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Towns and villages near Lambrook
Also in Lambrook
Honest limits
In fairness, some problems need a different fix:
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Materials we work on in Lambrook
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Covering Lambrook
Lambrook is about 5 miles north-east of Yeovil, in Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 640 places across Somerset, from the larger towns to small villages.
Every address in BA22 is covered. Close by, we cover Queen Camel (1 mile north), Wales (1 mile north), Eyewell (1 mile north), Sparkford (2 miles north) and Sutton Montis (2 miles north-east). We also work in nearby towns such as Yeovil (5 miles south-west), Wells (14 miles north), Shepton Mallet (12 miles north), Street (11 miles north-west), Glastonbury (11 miles north-west) and Crewkerne (13 miles south-west).
Around Lambrook
In Lambrook, that means homes near Countess Gytha Primary School, Marston Inn and Church of St Mary and the streets around them. The nearest railway station is Yeovil Pen Mill station, about 4.7 miles south. A little further out are Yeovil Hospital (5 miles south-west) and Haynes Motor Museum (2.4 miles north).
FAQs for Lambrook
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Will the price change on the day?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
How do I book?
Use the quote form or ring 0345 017 0787.
What areas do you cover?
All of Somerset, and the rest of the UK. There’s no extra charge for travel.
Do you cover Lambrook?
We do. Technicians travel to Lambrook from across the region, and the price is the same as everywhere else.
About our accreditations · Every repair comes with a one-year guarantee.
