Birmingham · England
Bath re-enamelling & resurfacing in Whitehouse Common, Birmingham
Full bath re-enamelling and resurfacing at your home in Whitehouse Common, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- A roll-top that is seen better days
Bath re-enamelling at your home in Whitehouse Common
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Our technicians work on acrylic baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are thin, worn enamel in places and stains that won’t shift.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Whitehouse Common (B75, B76)
- Region
- Birmingham
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know which floor the room is on
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
Ask for a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
Nearby places to Whitehouse Common
What else we do in Whitehouse Common
Landlords, agents and businesses in Whitehouse Common
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair won’t do:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Whitehouse Common
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Common problems we fix in Whitehouse Common
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
You may need us if you’ve spotted any of these:
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
- Worn patches where water runs and sits
What to look for in a quote
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- What aftercare is recommended
- How long it needs to cure
Repair or replace in Whitehouse Common?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- One visit for most repairs
- CHAS and Constructionline accredited
- Work done at your home or business
- No need to remove anything
Take a look at our prices page or resurfacing vs replacement cost guide.
Covering Whitehouse Common
Whitehouse Common is about 1 mile north-east of Royal Sutton Coldfield, in Birmingham. Customers in Whitehouse Common get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Whitehouse Common is one of 140 towns and villages in Birmingham where we work. Our jobs stretch from Whitehouse Common to Birmingham (8 miles away).
We cover every part of B75 and B76 and the streets around it. From Keyse Road, Sadler Road and Glover Road or anywhere nearby, a technician can come to you. Close by, we cover Falcon Lodge (1 mile south-east), Bassetts Pole (1 mile north), Allen End (2 miles east), Stoke End (2 miles east) and Carroway Head (2 miles north-east). Further out, we also cover Birmingham (8 miles south-west), Erdington (4 miles south-west), Lee Bank (8 miles south-west), Cape Hill (9 miles south-west), Streetly (4 miles west) and Paradise (8 miles south-west).
What’s near Whitehouse Common
Our customers here include homes close to Marsh Hill Boys School, Church of Saint Chad and Fairfax School, among other places. The nearest railway station is Sutton Coldfield station, roughly 1.2 miles west of the centre. Other landmarks nearby include Good Hope Hospital (0.6 miles west) and Castle Vale Shopping Centre (3.6 miles south). For a walk, there’s Park Hall Nature Reserve and Barr Beacon.
- Other local spots include Sutton New Hall (2.3 miles south)
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
FAQs for Whitehouse Common
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your pictures and you’ll get one combined price.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Aftercare tips
Simple care helps the repair last. Our advice:
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
