Staffordshire · England
Bath re-enamelling & resurfacing in Allen End, Staffordshire
We travel to Allen End for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
About our bath re-enamelling in Allen End
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with stains that won’t shift and a peeling or bubbling previous coating, we can help.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Allen End (B78)
- County
- Staffordshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
How to look after the repair
So the finish stays in good condition:
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
- Get any chip repaired quickly
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Allen End clients choose us
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- We leave the room as we found it
- Technicians who travel to you, UK-wide
Read our prices page or guide to resurfacing and replacement costs.
About Allen End
Allen End is about 3 miles east of Royal Sutton Coldfield, in Staffordshire. Across the B78 area, a technician comes to you. Our repair technicians cover 512 places across Staffordshire, from the larger towns to small villages. Our jobs stretch from Allen End to Birmingham (9 miles away).
We work across B78. Other places close to Allen End include Stoke End (1 mile north-east), Grove End (1 mile south), Hunts Green (1 mile east), Middleton (1 mile north-east) and Over Green (1 mile south). Further out, we also cover Tamworth (5 miles north-east), Cannock (14 miles north-west), Lichfield (8 miles north), Rugeley (15 miles north-west), Burntwood (11 miles north-west) and Hednesford (14 miles north-west).
Near you in Allen End
Locally, our jobs take us to homes close to New Hall Primary School and John Willmott School, among other places. The closest station to Allen End is Sutton Coldfield station, roughly 2.9 miles west. Nearby you’ll also find Sutton New Hall (2.5 miles south-west) and Castle Vale Shopping Centre (3.9 miles south-west). Not far away are Middleton Lakes RSPB reserve.
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- The material and finish
- What kind of damage it is
- The colour and finish to match
- Whether we combine several jobs
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- One picture of the entire bath
- Any details about the material
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
What a repair cannot fix
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Landlord and trade work in Allen End
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Also near Allen End
Other services in Allen End
Allen End: your questions answered
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What areas do you cover?
We work UK-wide, and that includes Allen End. Prices don’t change with location.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens on the day
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Related advice
Do you need bath re-enamelling in Allen End?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Keep an eye out for these signs:
- Several chips and rust patches
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
Comparing quotes
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
