Lincolnshire · England
Bath re-enamelling & resurfacing in Wickenby, Lincolnshire
Bath re-enamelling in Wickenby without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Bath re-enamelling in Wickenby without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We regularly repair basins & shower trays, pressed steel baths and acrylic baths, and common reasons people contact us are thin, worn enamel in places and a bath in a colour that no longer suits.
Every repair comes with our one-year guarantee, wherever you are in Lincolnshire.
- Location
- Wickenby (LN3)
- Region
- Lincolnshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What bath re-enamelling costs
Prices start from £350. We don’t charge extra for travel to Wickenby. The price depends on:
- Doing more than one item at once
- Unusual colours or finishes
- Access to the area
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
Two or three clear pictures are typically enough. It helps if you send:
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Nearby places to Wickenby
Other services in Wickenby
Wickenby and nearby
Wickenby is about 10 miles north-east of Lincoln, in Lincolnshire. Wherever you are in the LN3 postcode area, a technician comes to you. Wickenby is one of 732 places in Lincolnshire where we work. Our jobs stretch from Wickenby to Leeds (about 59 miles away).
We work across LN3 and the streets around it. Whether you live on Station Road, Snarford Road and Snelland Road or anywhere nearby, we can come to you. Close by, we cover Snelland (1 mile south-west), Lissington (2 miles north-east), Faldingworth (2 miles north-west), Buslingthorpe (2 miles north) and Holton cum Beckering (2 miles east). We also work in nearby towns such as Lincoln (10 miles south-west), North Hykeham (13 miles south-west), Horncastle (13 miles south-east), Birchwood (12 miles south-west), Woodhall Spa (14 miles south-east) and Hykeham (13 miles south-west).
Landmarks near Wickenby
Our customers here include homes close to Church of St Peter and St Lawrence, among other places. Wickenby’s nearest station is Market Rasen station, about 4.5 miles north. Other landmarks nearby include Goltho Manor (3.5 miles south-east).
Keeping it looking good
It’s all simple stuff:
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Your questions about bath re-enamelling in Wickenby
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Do you come to Wickenby?
We do. We send a technician to Wickenby for every job, and the price is the same as everywhere else.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What happens next?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Repairing versus replacing in Wickenby
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Prices start from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
Take a look at our pricing or bath cost comparison.
When to call us in Wickenby
Often the bath has just had decades of use. The body of the bath is usually perfectly sound.
Send us a picture if you notice any of these:
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
- Chips and rust in more than one place
Before you book anyone
- How to look after the finish
- What happens if the damage is worse than the photos show
- Whether the price covers travel
- What prep work is covered
What we can’t put right
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take most of the day, including clearing up.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
Get a quote
To get a price, send a couple of pictures using our quote form or ring us. We will say straight away if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
