Lincolnshire · England
Bath re-enamelling & resurfacing in Holton cum Beckering, Lincolnshire
We travel to Holton cum Beckering for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Holton cum Beckering
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Our technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and common reasons people get in touch are worn patches where water runs and sits and enamel that’s lost its shine and feels rough.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Holton cum Beckering (LN8)
- Area hub
- Lincolnshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Holton cum Beckering: your questions answered
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Do you cover the entire of Lincolnshire?
Everywhere in the UK, Holton cum Beckering included. There’s no extra charge for travel.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Places near Holton cum Beckering
Also in Holton cum Beckering
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Respect the curing time we give you
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
- Fix dripping taps quickly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Our work in Holton cum Beckering
Holton cum Beckering is about 11 miles north-east of Lincoln, in Lincolnshire. From the centre of Holton cum Beckering to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Holton cum Beckering is one of 732 places in Lincolnshire where we work. Our nearest city page is Leeds, about 61 miles away.
We work across LN8. If you’re just outside Holton cum Beckering, we cover Lissington (1 mile north), Wickenby (2 miles west), Snelland (2 miles west), Buslingthorpe (3 miles north-west) and Faldingworth (4 miles north-west). Within a short drive, we also cover Lincoln (11 miles south-west), Louth (14 miles east), North Hykeham (14 miles south-west), Horncastle (12 miles south-east), Birchwood (13 miles south-west) and Woodhall Spa (12 miles south).
What’s near Holton cum Beckering
Our customers here include homes close to Church of All Saints, among other places. The nearest railway station is Market Rasen station, about 4.7 miles north. Further afield, we also cover the area around Goltho Manor (2.4 miles south).
Common problems we fix in Holton cum Beckering
Frequently the bath has just had decades of use. The body of the bath is usually perfectly sound.
Signs it’s time to call us include:
- Wear marks under the taps
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
- Staining under the taps and around the waste
Before you book anyone
- If travel is included in the price
- How to care for the finish
- What the guarantee covers, and for how long
- Who turns up on the day
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow a full day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Advice
When a repair is not the answer
Some jobs aren’t right for a repair, for example:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Landlord and trade work in Holton cum Beckering
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- The type of damage
- How many areas need work
- How easy the damage is to reach
- How many items we do on one visit
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Your postcode, so we can check dates
- Something in shot to show the size
- A clear, close picture of the problem area
- A photo taken from further back
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Should you replace it?
A replacement often means several trades over several days. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Repair technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- Free fixed quotes from pictures
Read our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
