Hampshire · England
Bath re-enamelling & resurfacing in Wickham, Hampshire
Bath re-enamelling for Wickham, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Bath re-enamelling in Wickham, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a coating lifting around the plughole and thin, worn enamel in places, we can usually put it right, whatever the material.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Where
- Wickham (PO17)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Wickham
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Are there extra charges for Wickham?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Towns and villages near Wickham
Other services in Wickham
Landlord and trade work in Wickham
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Signs you need bath re-enamelling in Wickham
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- Brown or grey marks that don’t clean off
- Several chips and rust patches
- A dull, rough surface that will not come clean
- A period or roll-top bath worth keeping
Before you book anyone
- Is the price fixed, and does it include VAT?
- How the colour is matched
- How the room is protected while they work
- How to look after the finish
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Previous DIY repairs that have to come out
- The colour and finish to match
- The material
- Whether it’s a chip, crack, burn or wear
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- A photo taken from further back
- The material, if you know it
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About Wickham
Wickham is about 3 miles north of Fareham, in Hampshire. Our technicians come to clients in Wickham and the surrounding area, so you don’t need to take anything anywhere. We work in 683 places in Hampshire, from the larger towns to small villages. Our jobs stretch from Wickham to London (63 miles away).
Jobs in PO17 work the same way as everywhere else we cover. From The Square, Station Road and Bridge Street or a nearby road, we can come to you. Wickham sits on or near the A32 and A334, which makes travel easy. We also travel to Shedfield (1 mile north-west), Shirrell Heath (2 miles north), Kingsmead (2 miles north-east), Woodend (2 miles north-east) and Mislingford (2 miles north). Within a short drive, we also cover Winchester (12 miles north-west), Gosport (7 miles south), Havant (9 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south) and Horndean (8 miles east).
Near you in Wickham
Around Wickham, we work in homes near Church of St Nicholas, Wickham Church of England Primary School and The Old House Hotel. Wickham’s nearest station is Fareham station, roughly 3.2 miles south of the centre. Well-known places in the area include Fareham Shopping Centre (3.2 miles south) and Carron Row Farm Museum (3.5 miles south-west). Open spaces near Wickham include St Clair's Meadow and Portsdown Hill.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes most of the day for most jobs. The room is left tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know about parking or access
- Keep children and pets away from the room on the day
- Open a window if you can
Get a quote
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Repairing versus replacing in Wickham
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
What you get with us
- Same prices wherever you are
- Every repair guaranteed for a year
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
See our pricing and resurfacing vs replacement cost guide.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Store bottles off the bath
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
