Nottinghamshire · England
Bath Re-enamelling for Widmerpool homes
Bath re-enamelling in Widmerpool without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Landlords, agents and businesses in Widmerpool
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About our bath re-enamelling in Widmerpool
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re frequently asked to fix stains that won’t shift and an old resurfacing that’s failing, across cast iron baths, acrylic baths and basins & shower trays.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Widmerpool (NG12)
- County
- Nottinghamshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Widmerpool. The price depends on:
- Any earlier repairs that need removing first
- How many areas need work
- Access to the area
- How many items we do on one visit
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A picture taken from further back
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
How it works
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Open a window if you can
- Let us know if it has been repaired before
Get a quote
Upload a photo of the damage and a wider shot of the entire item, and tell us you’re in Widmerpool, and we’ll come back with a fixed quote.
Related advice
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Widmerpool. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Widmerpool customers choose us
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- Everything repaired in place
See our prices page or bath cost comparison.
Common problems we fix in Widmerpool
Many baths we resurface have simply been well used. The body of the bath is normally perfectly sound.
Keep an eye out for these signs:
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
- Lots of chips and rust spots
Before you book anyone
- When it can be used again
- Aftercare advice
- A fixed quote, and whether VAT is included
- If travel is included in the price
Questions from Widmerpool
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
How long will the bath be out of use?
One day for most baths and can be used the day after. We will confirm timings when we quote.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Covering Widmerpool
Widmerpool is about 6 miles south-east of West Bridgford, in Nottinghamshire. Jobs in Widmerpool are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover all 329 towns and villages in Nottinghamshire. We work right across the region, from Widmerpool to Birmingham (about 43 miles away).
Here we cover the NG12 postcode area. That includes homes on Station Road, Keyworth Road and Church Lane. Other places close to Widmerpool include Stanton-on-the-Wolds (2 miles north), Willoughby-on-the-Wolds (2 miles south), Keyworth (2 miles north-west), Hickling Pastures (2 miles east) and Normanton-on-the-Wolds (3 miles north). Larger places within reach include Beeston (9 miles north-west), Carlton (9 miles north), Hucknall (14 miles north-west), West Bridgford (6 miles north-west), Netherfield (8 miles north) and Eastwood (15 miles north-west).
Landmarks near Widmerpool
We visit homes around St Peter and St Paul's Church and South Wolds Academy and the streets around them.
Places near Widmerpool
Also in Widmerpool
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
