West Sussex · England
Bath Re-enamelling for Wiggonholt homes
Bath re-enamelling across Wiggonholt and nearby, done in a single visit in most cases.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
About our bath re-enamelling in Wiggonholt
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Typical jobs include several chips and rust patches and a peeling or bubbling previous coating, across pressed steel baths, Victorian roll-tops and acrylic baths.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Wiggonholt (RH20)
- Area hub
- West Sussex
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Nearby places to Wiggonholt
What else we do in Wiggonholt
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What we’re called out for in Wiggonholt
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Common reasons people in Wiggonholt contact us include:
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
- Stains that will not shift
- An old resurfacing that is failing
Comparing quotes
- If travel is included in the price
- Who will actually do the work
- Aftercare advice
- What protection goes down before work starts
Honest limits
A repair is not right for every job, for example:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
Send us pictures and we will tell you honestly before you book.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Our work in Wiggonholt
Wiggonholt is about 2 miles north-west of Storrington, in West Sussex. Across the RH20 area, we carry out the work at your property. Wiggonholt is one of 371 towns and villages in West Sussex where we work. Our nearest city page is London, about 42 miles away.
We cover every part of the RH20 postcode area. We also travel to Marehill (1 mile north), West Chiltington Common (1 mile east), Cootham (2 miles south-east), Nutbourne (2 miles north-east) and Broomershill (2 miles north). We also work in nearby towns such as Horsham (11 miles north-east), Worthing (9 miles south-east), Bognor Regis (13 miles south-west), Chichester (14 miles south-west), Littlehampton (9 miles south) and Shoreham-by-Sea (12 miles south-east).
Landmarks near Wiggonholt
Locally, our jobs take us to homes close to Wiggonholt Church and Parham Park, among other places. For rail, the closest station is Pulborough station, roughly 1.8 miles north-west of the centre. Well-known places in the area include The Storrington And District Museum (2.3 miles south-east) and Amberley Castle (3.1 miles south-west). Green spaces nearby include Amberley Wildbrooks RSPB Reserve.
Repairing versus replacing in Wiggonholt
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why Wiggonholt customers choose us
- Nothing taken out or refitted
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
- Colour mixed on the day to match
See our pricing and guide to resurfacing and replacement costs.
Wiggonholt questions
Which areas do you work in?
Across the UK, and that includes Wiggonholt. Prices don’t change with location.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
How long is the bath unusable?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- The material and finish
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
You can generally get a fixed price without us visiting. To make it quick:
- Something in shot to show the size
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- One sharp close-up of the damage
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Landlords, agents and businesses in Wiggonholt
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
For anyone letting property in or around Wiggonholt, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes most of the day. We clean up when we’re done and let you know when you can use it again.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
