West Sussex · England
Bath re-enamelling & resurfacing in Broomershill, West Sussex
Bath re-enamelling across Broomershill and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Worn patches where water runs and sits
Bath re-enamelling in Broomershill, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for staining under the taps and around the waste and wear marks under the taps, in pressed steel baths, acrylic baths and cast iron baths.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Broomershill (RH20)
- County
- West Sussex
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Broomershill
Broomershill is about 10 miles south-west of Horsham, in West Sussex. We visit homes and businesses in Broomershill, so there’s no workshop to go to. We cover all 371 towns and villages across West Sussex, from the larger towns to small villages. You can also see our page for London, about 41 miles away.
Jobs in RH20 are booked in the same way as anywhere else. We also travel to Codmore Hill (1 mile north-west), Marehill (1 mile south-east), Nutbourne (1 mile south-east), North Heath (1 mile north) and Gay Street (1 mile north-east). Within a short drive, we also cover Horsham (10 miles north-east), Worthing (11 miles south), Bognor Regis (15 miles south-west), Chichester (15 miles south-west), Littlehampton (11 miles south) and Shoreham-by-Sea (13 miles south-east).
Local landmarks in Broomershill
Our clients here include homes close to The Red Lion Public House, The Parish Church of St Mary and St Mary's Church of England Primary School and the streets around them. Broomershill’s nearest station is Pulborough station, about 1.3 miles south-west of the centre. Well-known places in the area include Coates Castle (4.4 miles west) and The Storrington And District Museum (3.8 miles south-east). Green spaces nearby include The Mens.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Advice
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your photos
- One visit for most repairs
See our pricing and bath cost comparison.
Broomershill questions
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
Aftercare tips
Once the work has cured, treat it gently:
- Never use suction bath mats
- Wash away dyes and oils after use
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Places near Broomershill
Other services in Broomershill
Common problems we fix in Broomershill
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Contact us if you’ve noticed any of these:
- A roll-top that’s seen better days
- An old resurfacing that’s failing
- Stains that will not shift
- Thin, worn enamel in places
Before booking anyone
- How the colour is matched
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- What preparation is included
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Honest limits
In fairness, there are a few things a repair won’t fix:
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- The material
- The size and number of damaged areas
- Any earlier repairs that need removing first
- The colour and finish to match
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- One picture of the whole bath
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say straight away if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
