Northamptonshire · England
Bath re-enamelling & resurfacing in Wilbarston, Northamptonshire
Fixed-price bath re-enamelling in Wilbarston and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
How we handle bath re-enamelling in Wilbarston
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. Common call-outs are for a bath that stays dull however much you clean it and wear marks under the taps, on basins & shower trays, pressed steel baths and cast iron baths.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Wilbarston (LE16)
- Region
- Northamptonshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take a full day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
- Let us know about parking or access
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Wilbarston questions
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you cover the whole of Northamptonshire?
We work UK-wide, so Wilbarston is covered. Our prices are the same everywhere.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What happens next?
We review the pictures and send a fixed quote and the next dates we have.
What affects the price in Wilbarston
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- What kind of damage it is
- How easy the damage is to reach
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Something in shot to show the size
- Where you are, by postcode
- One picture of the entire bath
- One sharp close-up of the damage
To get a price, send two or three photos using our quote form or ring us. We’ll say right away whether it can be repaired.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair won’t do:
- A metal bath with a through crack
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Wilbarston
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Keeping it looking good
After the repair has cured, a few habits help it last:
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- A quick wipe after use keeps limescale away
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Do you need bath re-enamelling in Wilbarston?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted:
- A coloured bath you want in white
- An old resurfacing that is failing
- Stains that will not shift
- Enamel that’s lost its shine and feels rough
Comparing quotes
- Whether a trained technician does the job
- How the colour is matched
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the pictures show
Wilbarston and the surrounding area
Wilbarston is about 4 miles west of Corby, in Northamptonshire. Jobs in Wilbarston are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Wilbarston is one of 364 places in Northamptonshire we cover. We work right across the region, from Wilbarston to Birmingham (about 46 miles away).
Jobs in LE16 work the same way as everywhere else we cover. Whether you live on Main Street, Chapel Lane and Scotts Lane or a nearby road, a technician can come to you. If you are just outside Wilbarston, we cover Stoke Albany (1 mile south-west), Brampton Ash (2 miles west), Dingley (3 miles west), Desborough (3 miles south) and Braybrooke (4 miles south-west). We also work in nearby towns such as Corby (4 miles east), Kettering (7 miles south-east), Wellingborough (13 miles south), Market Harborough (5 miles west), Raunds (15 miles south-east) and Moulton (14 miles south).
What’s near Wilbarston
We visit homes around Wilbarston Church of England Primary School, Fox Inn Public House and Church of All Saints and the streets around them. Wilbarston’s nearest station is Market Harborough station, roughly 4.5 miles west. Nearby you will also find Rockingham Castle (3.8 miles north-east). The countryside around Wilbarston includes The Plens.
Towns and villages near Wilbarston
More services for Wilbarston
About our accreditations · Every repair comes with a one-year guarantee.
