North Yorkshire · England
Bath re-enamelling & resurfacing in Willerby, North Yorkshire
Full bath re-enamelling and resurfacing in Willerby, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Willerby, done in place
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with several chips and rust patches and a period or roll-top bath worth keeping, we can help, whatever the material.
All our work comes with our one-year guarantee, wherever you are in North Yorkshire.
- Location
- Willerby (YO12)
- County
- North Yorkshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
About Willerby
Willerby is about 6 miles south of Scarborough, in North Yorkshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Willerby is one of 626 towns and villages in North Yorkshire where we work. We work right across the region, from Willerby to Leeds (52 miles away).
Here we cover the YO12 postcode area. Whether you live on Wain's Lane, Lowfields and Ings Close or anywhere nearby, a technician can come to you. Nearby, we also work in Staxton (1 mile east), Binnington (1 mile west), Flixton (2 miles east), Ganton (2 miles south-west) and Seamer (3 miles north). Larger places within reach include Scarborough (6 miles north), Falsgrave (6 miles north), Malton (15 miles west), Filey (6 miles east), Pickering (14 miles west) and Northstead (7 miles north).
What’s near Willerby
We visit homes around Church of St Peter and the streets around them. The closest station to Willerby is Seamer station, roughly 3.2 miles north-east of the centre. Further afield, we also cover the area around Ayton Castle (4 miles north) and Scarborough Hospital (5.8 miles north). For a walk, there is Oliver's Mount and Scarborough Mere.
Willerby: your questions answered
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
How the visit works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes most of the day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Getting a price
If you are in Willerby and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
When a repair isn’t the answer
We won’t take on work that will not last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
How we price bath re-enamelling
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- How hard the colour is to match
- How easy the damage is to reach
- Doing more than one item at once
- What kind of damage it is
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
You can generally get a fixed quote without us visiting. To help us price it:
- A picture taken from further back
- A coin beside the damage so we can judge size
- The material, if you know it
- The postcode, so we can plan the visit
To get a price, send a couple of photos using our quote form or call us. We’ll say immediately whether it can be repaired.
Also near Willerby
Also in Willerby
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Respect the curing time we give you
- Wash away dyes and oils after use
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What we are called out for in Willerby
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Look out for these signs:
- An original cast iron bath that needs restoring
- Wear marks under the taps
- Stains that won’t shift
- Several chips and rust patches
Questions to ask before booking
- What aftercare is recommended
- What preparation is included
- Who turns up on the day
- Whether there are any call-out or travel charges
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- A year’s guarantee on all work
- Work done at your home or business
- Dust sheets down, tidy finish
- No need to remove anything
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
