Northamptonshire · England
Bath re-enamelling & resurfacing in Williamscot, Northamptonshire
Local bath re-enamelling for Williamscot: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
Do you need bath re-enamelling in Williamscot?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
If you can see any of these, send us a photo:
- Several chips and rust patches
- Brown or grey marks that do not clean off
- An old resurfacing that is failing
- A roll-top that’s seen better days
Before you book anyone
- Whether the colour is mixed to match
- How your room will be protected
- What preparation is included
- What aftercare is recommended
Bath re-enamelling in Williamscot, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We regularly repair pressed steel baths, acrylic baths and Victorian roll-tops, and the jobs we see most are chips and rust in more than one place and thin, worn enamel in places.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Williamscot (OX17)
- Area hub
- Northamptonshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Williamscot?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why Williamscot customers choose us
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or bath cost comparison.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for a full day from start to finish. Before we go, we’ll explain when it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Advice
Keeping it looking good
Once the work has cured, treat it gently:
- Fix dripping taps quickly
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Store bottles off the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Honest limits
It helps to know what we can’t do too:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Questions from Williamscot
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Williamscot and nearby
Williamscot is about 3 miles north-east of Banbury, in Northamptonshire. Whether you’re in the middle of Williamscot or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 364 towns and villages in Northamptonshire. Our nearest city page is Birmingham, about 36 miles away.
Our visits in OX17 work the same way as everywhere else we cover. We also cover the places around Williamscot: Wardington (1 mile north-east), Upper Wardington (1 mile north-east), Chipping Warden (2 miles north-east), Lower Thorpe (3 miles east) and Aston le Walls (4 miles north). Within a short drive, we also cover Daventry (12 miles north-east), Brackley (8 miles south-east), Towcester (13 miles east), Everdon (14 miles north-east), Hinton (6 miles north-east) and Silverstone (12 miles east).
Local landmarks in Williamscot
Our customers here include homes close to Church of St Mary Magdalene, Chenderit School and Cropredy Church of England Primary School. The closest station to Williamscot is Banbury station, about 3.1 miles south-west. A little further out are Castle Quay Shopping Centre (3.2 miles south-west) and Bygones Museum (3.4 miles north-west). For a walk, there’s Farthinghoe Nature Reserve and Crouch Hill.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Williamscot as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
For anyone letting property in or around Williamscot, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Towns and villages near Williamscot
Other services in Williamscot
About our accreditations · Every repair comes with a one-year guarantee.
