Herefordshire · England
Bath re-enamelling & resurfacing in Wilson, Herefordshire
Fixed-price bath re-enamelling in Wilson and the surrounding area, generally in one visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our bath re-enamelling in Wilson
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We’re frequently asked to fix chips and rust in more than one place and an outdated colour you’d like to change, across Victorian roll-tops, acrylic baths and pressed steel baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Wilson (HR9)
- Region
- Herefordshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Wilson?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The most common problems we’re called about are:
- Lots of chips and rust spots
- A coating lifting around the plughole
- A roll-top that’s seen better days
- Worn patches where water runs and sits
What your quote should include
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
- Who turns up on the day
Questions from Wilson
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you repair something that is been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What happens next?
You’ll get a fixed quote back, plus dates. You are under no obligation.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
What affects the price in Wilson
Prices start from £350. We price every job individually. What matters most is:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Unusual colours or finishes
We charge the same wherever you are, so there is no premium for Wilson. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
Before you send photos, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
The process
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow the best part of a day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Repairing versus replacing in Wilson
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Wilson customers choose us
- Fixed prices from your photos
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
See our full price list and resurfacing vs replacement cost guide.
Places near Wilson
What else we do in Wilson
Aftercare tips
To keep it looking its best for years:
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Keep toiletries on a shelf rather than in the bath
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Our work in Wilson
Wilson is about 3 miles west of Ross-on-Wye, in Herefordshire. Anywhere in HR9, we carry out the work at your property. Wilson is one of 255 places in Herefordshire we cover. Our nearest city page is Birmingham, about 50 miles away.
Our technicians cover all of the HR9 postcode area. If you’re just outside Wilson, we cover Glewstone (1 mile south), Peterstow (1 mile north-east), Bridstow (2 miles east), Wilton (2 miles east) and Llangarron (2 miles south-west). We also work in nearby towns such as Hereford (11 miles north), Ross-on-Wye (3 miles east), Ledbury (13 miles north-east), Redhill (10 miles north), Newton Farm (10 miles north-west) and Merrivale (3 miles east).
Local landmarks in Wilson
Typical jobs here are in homes near Yew Tree Inn and Church of St Peter and the streets around them. Further afield, we also cover the area around Railways In Miniature Museum (2.6 miles east) and Hentland Chapel Tump (1.3 miles north-west). Open spaces near Wilson include Chase Wood Hill.
About our accreditations · Every repair comes with a one-year guarantee.
