Dorset · England
Bath re-enamelling & resurfacing in Winterborne Stickland, Dorset
Full bath re-enamelling and resurfacing for homes and businesses in Winterborne Stickland and across Dorset. Free, fixed quotes from your photos.
- Resurfacing from £350
- A coloured bath you want in white
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Winterborne Stickland
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a period or roll-top bath worth keeping and chips and rust in more than one place, we can help, on Victorian roll-tops, basins & shower trays and acrylic baths alike.
We stand behind the work with a one-year guarantee.
- Location
- Winterborne Stickland (DT11)
- Area hub
- Dorset
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Winterborne Stickland
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before you book
- No extra charge for your area
- Colour-matched on site
Take a look at our full price list or resurfacing vs replacement cost guide.
Nearby places to Winterborne Stickland
Also in Winterborne Stickland
About Winterborne Stickland
Winterborne Stickland is about 4 miles south-west of Blandford Forum, in Dorset. Jobs in Winterborne Stickland are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover 462 places in Dorset.
We work across the DT11 postcode area. Local streets include The Triangle, Legion Lane and Dunbury Lane, and we cover them all. If you’re just outside Winterborne Stickland, we cover Winterborne Clenston (1 mile south), Dunbury (1 mile south-west), Winterborne Houghton (1 mile west), Milton Abbas (2 miles south-west) and The Folly (2 miles north). Further out, we also cover Dorchester (13 miles south-west), Wimborne Minster (12 miles east), Blandford Forum (4 miles north-east), Gillingham (14 miles north), Shaftesbury (12 miles north) and Sherborne (14 miles north-west).
Landmarks near Winterborne Stickland
In Winterborne Stickland, that means homes near Church of St Mary and The Crown Inn, among other places. Further afield, we also cover the area around Blandford Community Hospital (3.4 miles north-east) and Park Farm Museum (1.9 miles south-west). Not far away are Bell Hill.
Landlords, agents and businesses in Winterborne Stickland
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
What affects the price in Winterborne Stickland
Resurfacing from £350. You will know the full cost before you book. We take into account:
- Where the damage is and how we get to it
- How hard the colour is to match
- Whether we combine several jobs
- The material and finish
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Signs you need bath re-enamelling in Winterborne Stickland
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
Clients typically contact us about:
- A coating lifting around the plughole
- A coloured bath you want in white
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Questions to ask before booking
- How the room is protected while they work
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the pictures show
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Your questions about bath re-enamelling in Winterborne Stickland
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What we cannot put right
We’ll always be straight with you, so here’s what a repair won’t do:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and we start. You can expect it to take a full day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Keep children and pets away from the room on the day
- Ensure the area is dry
- Mention any parking restrictions or tricky access
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
Keeping it looking good
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
