Norfolk · England
Bath Re-enamelling in Winterton-on-Sea
Our repair technicians come to Winterton-on-Sea for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An old resurfacing that’s failing
Bath re-enamelling at your home in Winterton-on-Sea
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Our repair technicians work on Victorian roll-tops, basins & shower trays and pressed steel baths, and people most often call us about a bath that stays dull however much you clean it and chips and rust in more than one place.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Area
- Winterton-on-Sea (NR29)
- County
- Norfolk
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Looking after it afterwards
Aftercare is simple:
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- Repair dripping taps early
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day. Before leaving, we tell you how long to leave it and how to look after it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
What affects the price in Winterton-on-Sea
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Previous DIY repairs that have to come out
- The material
- Doing more than one item at once
- How easy the damage is to reach
Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
It only takes a minute to photograph the damage. Please include:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Something in shot to show the size
- A close-up of the damage, in focus
Upload photos of the damage and one of the whole item, and tell us you are in Winterton-on-Sea, and we’ll come back with a fixed quote.
Places near Winterton-on-Sea
Also in Winterton-on-Sea
When a repair is not the answer
We won’t take on work that will not last, so these are the limits:
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
When to call us in Winterton-on-Sea
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- A coloured bath you want in white
- An old resurfacing that is failing
- A dull, rough surface that will not come clean
- A roll-top that is seen better days
Before booking anyone
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- How your room will be protected
- What happens if the damage is worse than the photos show
Winterton-on-Sea: your questions answered
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Do you work in Winterton-on-Sea?
Yes, we do. We send a technician to Winterton-on-Sea for every job, and the price is the same as everywhere else.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Are there extra charges for Winterton-on-Sea?
No. Our quotes include travel, with the same prices everywhere we work.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you repair something that is been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Landlords, agents and businesses in Winterton-on-Sea
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Covering Winterton-on-Sea
Winterton-on-Sea is about 8 miles north of Great Yarmouth, in Norfolk. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Winterton-on-Sea is one of 797 places in Norfolk where we work.
Our technicians cover all of the NR29 postcode area and the streets around it. Streets in the area include Market Place, North Market Road and Winmer Avenue. Nearby, we also work in East Somerton (1 mile west), West Somerton (2 miles west), Martham (3 miles west), Horsey (3 miles north-west) and Cess (3 miles west). Larger places within reach include Great Yarmouth (8 miles south), Gorleston-on-Sea (10 miles south), North Walsham (15 miles north-west), Southtown (8 miles south), Caister-on-Sea (5 miles south) and Bradwell (10 miles south).
Local landmarks in Winterton-on-Sea
Around Winterton-on-Sea, we work in homes near Winterton Primary School and Nursery, Flegg High School and Church of Holy Trinity and All Saints. Nearby you’ll also find Caister Castle (4.5 miles south) and Blitz and Pieces (2.3 miles south-east). The countryside around Winterton-on-Sea includes Winterton Dunes and Martham Broad.
About our accreditations · Every repair comes with a one-year guarantee.
