Norfolk · England

Bath Re-enamelling for Martham homes

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Martham. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Martham

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

About our bath re-enamelling in Martham

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you’re dealing with an original cast iron bath that needs restoring and a bath that stays dull however much you clean it, we can typically put it right.

Whatever the size of the job, it’s backed by a one-year guarantee in Martham and across Norfolk.

Roll-top bath being refinished by a Surface Doctor technician
Area
Martham (NR29)
County
Norfolk
Warranty
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

What bath re-enamelling costs

Prices start from £350. We don’t charge extra for travel to Martham. The price depends on:

  • What the surface is made of
  • The colour and finish to match
  • How many areas need work
  • The type of damage

The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.

Getting a price from pictures

When you take your photos, these tips help us give you a firm price:

  • What it’s made of, if you know
  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.

Do you need bath re-enamelling in Martham?

A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

Send us a picture if you notice any of these:

  • An outdated colour you’d like to change
  • Staining under the taps and around the waste
  • Several chips and rust patches
  • A bath that stays dull however much you clean it

Questions to ask before booking

  • Who will actually do the work
  • How long the guarantee is and what it covers
  • How soon you can use it again
  • Whether the price is fixed and includes VAT

Our hiring checklist

Landlord and trade work in Martham

If you manage property in Martham, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

Repair or replace in Martham?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Prices start from £350. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.

Why us?

  • Colour-matched on site
  • We leave the room as we found it
  • Most jobs done in one visit
  • We come to you, anywhere in the UK

Read our full price list and bath cost comparison.

What happens on the day

Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for the best part of a day from start to finish. Before leaving, we tell you how long to leave it and how to look after it.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s usually ready the next day.

How to prepare

  • Let us know which floor the room is on
  • Keep children and pets away from the room on the day
  • Mention any parking restrictions or tricky access

Getting a price

To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.

Send photos for a quote

Related advice

About Martham

Martham is about 8 miles north-west of Great Yarmouth, in Norfolk. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Martham is one of 797 towns and villages in Norfolk where we work.

Postcode districts we cover here: NR29. From Rowan Road, Rollesby Road and Bowman Close or a nearby road, we can come to you. Other places close to Martham include Cess (1 mile west), West Somerton (2 miles north-east), East Somerton (2 miles north-east), Winterton-on-Sea (3 miles east) and Horsey (3 miles north). Larger places within reach include Norwich (15 miles west), Great Yarmouth (8 miles south-east), Gorleston-on-Sea (10 miles south-east), Sprowston (13 miles west), Thorpe St Andrew (13 miles west) and North Walsham (13 miles north-west).

Near you in Martham

Our customers here include homes close to Martham Academy and Nursery, Victoria Inn and Church of St Mary and the streets around them. Further afield, we also cover the area around Martham Countryside Collection (under half a mile north) and Caister Castle (4.6 miles south-east). For a walk, there is Winterton Dunes and Martham Broad.

Map of Martham © OpenStreetMap contributors

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.

What we can’t put right

A repair isn’t right for every job, for example:

  • Anything hidden under an old coating, until we remove it
  • A poorly supported acrylic bath, until it’s firmed up
  • A bath that is rusted through

Not sure? Send pictures and we’ll give you a straight answer before booking.

What we work on

  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths

Common questions in Martham

What information do you need?

Just photos, your postcode and a contact number. On the day, access to the room.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Can you redo someone else’s repair?

Yes, we frequently do. It can add a little time, which we include in the quote.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Do you come to Martham?

We do. We send a technician to Martham for every job, and the price is the same as everywhere else.

What areas do you cover?

Across the UK, so Martham is covered. Our prices are the same everywhere.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

How durable is a resurfaced bath?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.