Birmingham · England
Bath re-enamelling & resurfacing in Witton, Birmingham
Our technicians come to Witton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole

Looking after it afterwards
Simple care helps the repair last. Our advice:
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Bath re-enamelling in Witton, done in place
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for a peeling or bubbling previous coating and a bath that stays dull however much you clean it, across Victorian roll-tops, acrylic baths and basins & shower trays.
A one-year guarantee comes as standard.

- Area
- Witton (B6, B23, B20)
- County
- Birmingham
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Nearby places to Witton
Other services in Witton
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Our work in Witton
Witton is about 2 miles west of Erdington, in Birmingham. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Witton is one of 140 towns and villages in Birmingham we cover.
Postcode districts we cover here: B6, B23 and B20. That includes homes on Birch Road, Oscott Road and Wyrley Road. Close by, we cover Stockland Green (1 mile east), Perry Common (1 mile north-east), Aston (1 mile south), Short Heath (1 mile north-east) and Gravelly Hill (1 mile east). Within a short drive, we also cover Birmingham (3 miles south), Royal Sutton Coldfield (4 miles north-east), Lee Bank (4 miles south), Cape Hill (4 miles south-west), Streetly (4 miles north) and Paradise (3 miles south).
Landmarks near Witton
In Witton, that means homes near Eden Boys' School, Stockland Green School and Perry Park, among other places. You will also find Deykin Avenue Junior and Infant School (0.5 miles south-east), All Souls' (0.6 miles south) and Boars Head pub (0.8 miles north-west). Witton’s nearest station is Witton station, roughly 0.5 miles south. Well-known places in the area include Museum of the Jewellery Quarter (2.3 miles south-west) and One Stop Shopping Centre (0.8 miles west). Green spaces nearby include Queslett Nature Reserve and Barr Beacon.
- Local facilities include Aston Manor (1.4 miles south)
The process
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Make sure the room can be ventilated
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Read more
What a repair can’t fix
We will always be straight with you, so here’s what a repair can’t fix:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Signs you need bath re-enamelling in Witton
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- Brown or grey marks that don’t clean off
- Wear marks under the taps
- An original cast iron bath that needs restoring
What to look for in a quote
- Whether they match the colour on site
- How soon you can use it again
- How changes to the job are handled
- If travel is included in the price
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How many items we do on one visit
- What the surface is made of
- How easy the damage is to reach
- Unusual colours or finishes
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- One sharp close-up of the damage
- One picture of the whole bath
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
For a price in Witton, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Witton: your questions answered
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Do you work in Witton?
Yes. We work across the UK and come to Witton and the rest of Birmingham. Send pictures and we’ll quote, or call 0345 017 0787.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
About our accreditations · Every repair comes with a one-year guarantee.

