Birmingham · England
Bath re-enamelling & resurfacing in Aston, Birmingham
Our technicians come to Aston for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- Thin, worn enamel in places
Bath re-enamelling in Aston, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on basins & shower trays, Victorian roll-tops and cast iron baths, and people most frequently call us about stains that won’t shift and worn patches where water runs and sits.
All our work comes with our one-year guarantee.
- Area
- Aston (B6, B2, B7)
- County
- Birmingham
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
What else we do in Aston
Where we work around Aston
Aston is about 2 miles north of Birmingham, in Birmingham. We travel to homes and businesses in Aston and the surrounding area, so you don’t need to take anything anywhere. We work in 140 places in Birmingham.
Our repair technicians cover all of B6, B2 and B7. That includes homes on Park Lane, Pugh Road and Rocky Lane and the roads around them. Being close to the A38(M), Aston is easy for our repair technicians to reach. Other places close to Aston include Witton (1 mile north), Gravelly Hill (1 mile north-east), Stockland Green (2 miles north-east), Bromford (2 miles east) and Perry Common (2 miles north). We also work in nearby towns such as Royal Sutton Coldfield (5 miles north-east), Cape Hill (3 miles west), Streetly (5 miles north), Hawkesley (7 miles south), Sparkbrook (3 miles south) and Londonderry (5 miles west).
What’s near Aston
We visit homes around Eastside City Park, King Solomon International Business School and The Britannia Public House. Other local landmarks include St Mary's Church (under half a mile south-west), Aston Tower Community Primary School (under half a mile west), Birmingham and Midland Institute (1.6 miles south-west) and Aston Manor Academy (0.5 miles south-west). The closest station to Aston is Aston station, roughly 0.5 miles north-east. Nearby you’ll also find Birmingham Children's Hospital (1.2 miles south-west) and Bromwich Castle (3.7 miles east). Not far away are Edgbaston Pool and Deer's Leap Wood.
- Parks and local facilities nearby include Aston Manor (within half a mile west)
Honest limits
Before you book, it’s worth knowing the limits:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
For landlords and businesses
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
When to call us in Aston
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
The most common problems we are called about are:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- A coating lifting around the plughole
- Stains that will not shift
Questions to ask before booking
- What the guarantee covers, and for how long
- When it can be used again
- Aftercare advice
- Whether the price is fixed and includes VAT
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Whether we combine several jobs
- Previous DIY repairs that have to come out
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Any details about the material
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
For a price in Aston, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Never use suction bath mats
- Repair dripping taps early
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Aston: your questions answered
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
What happens once I’ve sent photos?
You will get a fixed quote back. You are under no obligation.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you cover the whole of Birmingham?
Across the UK. Our prices are the same everywhere.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we will plan for it.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
