Essex · England
Bath Re-enamelling in Wivenhoe Quay
Bath re-enamelling for Wivenhoe Quay, without a refit. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Brown or grey marks that don’t clean off
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Wivenhoe Quay
- No need to remove anything
- Normally one visit, start to finish
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
Take a look at our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Wivenhoe Quay without replacing anything
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Whether it’s several chips and rust patches and stains that won’t shift, we can typically put it right, on basins & shower trays, acrylic baths and cast iron baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Wivenhoe Quay (CO7, CO5)
- Area hub
- Essex
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Wivenhoe Quay
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs immediately
Wipe the bath dry after use where you can, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
About Wivenhoe Quay
Wivenhoe Quay is about 3 miles south-east of Colchester, in Essex. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Wivenhoe Quay is one of 644 places in Essex where we work. Our jobs stretch from Wivenhoe Quay to London (51 miles away).
Postcode districts we cover here: CO7 and CO5. We regularly work on streets such as Rose Lane, Park Road and Ferry Road. Nearby, we also work in Wivenhoe (1 mile north), Rowhedge (1 mile west), East Donyland (1 mile south-west), Wivenhoe Cross (1 mile north) and High Park Corner (1 mile south). Further out, we also cover Colchester (3 miles north-west), Clacton-on-Sea (9 miles south-east), Maldon (15 miles south-west), Witham (14 miles west), Harwich (14 miles east) and Camulodunum (4 miles north-west).
Local landmarks in Wivenhoe Quay
Our customers here include homes close to Colchester Academy, Donyland Lodge and The Greyhound Public House, among other places. Also close by are The Church of St Mary (within half a mile south), Millfields Primary School (0.5 miles east) and Colne Local Nature Reserve (0.8 miles north). There is a railway station in Wivenhoe Quay itself: Wivenhoe station. Well-known places in the area include Wivenhoe Chapel Museum (under half a mile north-east) and Colchester Castle (3.4 miles north-west). Not far away are Cockaynes Wood.
Prices and what affects them
Resurfacing from £350. We do not charge extra for travel to Wivenhoe Quay. The price depends on:
- The type of damage
- Unusual colours or finishes
- What the surface is made of
- Access to the area
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- Something in shot to show the size
- Any earlier repairs or coatings
- One sharp close-up of the damage
- One picture of the entire bath
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Towns and villages near Wivenhoe Quay
More services for Wivenhoe Quay
Wivenhoe Quay questions
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you come to Wivenhoe Quay?
We do. Repair technicians travel to Wivenhoe Quay from across the region, with no extra charge for travel.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Ensure the room can be ventilated
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
