Hampshire · England
Bath re-enamelling & resurfacing in Wolverton, Hampshire
Problem with your bath in Wolverton? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Wolverton
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Typical jobs include a period or roll-top bath worth keeping and enamel that’s lost its shine and feels rough, on cast iron baths, basins & shower trays and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee in Wolverton and across Hampshire.
- Location
- Wolverton (RG26)
- Area hub
- Hampshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Wolverton
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Also near Wolverton
Also in Wolverton
Wolverton: your questions answered
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
What happens after I send pictures?
We review the photos and send a fixed quote and the next dates we have.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
How long does re-enamelling take?
Normally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
How the visit works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Ask for a price
Most clients in Wolverton get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Wolverton and nearby
Wolverton is about 3 miles south-west of Tadley, in Hampshire. Wherever you are in the RG26 postcode area, we come to you. Our technicians cover 683 places across Hampshire. Our jobs stretch from Wolverton to London (49 miles away).
Postcode districts we cover here: RG26. Close by, we cover Fair Oak (1 mile north), Kingsclere (2 miles west), Ashford Hill (2 miles north), Plastow Green (2 miles north-west) and Goose Hill (3 miles north). Further out, we also cover Basingstoke (6 miles south-east), Andover (14 miles south-west), Tadley (3 miles north-east), Hook (11 miles east), Popley (6 miles south-east) and Kempshott (6 miles south-east).
What’s near Wolverton
In Wolverton, that means homes near The George And Dragon Public House and Church of St Catherine and the streets around them. For rail, the closest station is Thatcham station, about 5 miles north. A little further out are Park Prewett Hospital (4.9 miles south-east). For a walk, there is Ladle Hill.
Honest limits
It helps to know what we can’t do:
- A metal bath with a through crack
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Don’t leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs straight away
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Why repair rather than replace?
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Honest advice, even when it means no job
- Everything repaired in place
- CHAS and Constructionline accredited
- Work done at your home or business
Read our prices page and guide to resurfacing and replacement costs.
What affects the price in Wolverton
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- What the surface is made of
Our prices are the same across the UK, with no extra for Wolverton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
