Leicestershire · England
Bath re-enamelling & resurfacing in Wolvey, Leicestershire
Full bath re-enamelling and resurfacing for homes and businesses in Wolvey and across Leicestershire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
Bath re-enamelling at your home in Wolvey
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are several chips and rust patches and a roll-top that’s seen better days.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Wolvey (LE10)
- Region
- Leicestershire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Common problems we fix in Wolvey
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Customers usually contact us about:
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Wear marks under the taps
- A dull, rough surface that won’t come clean
What to look for in a quote
- What happens if they find more damage
- Whether a trained technician does the job
- What preparation is included
- What protection goes down before work starts
Honest limits
In fairness, there are a few things a repair won’t fix:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
What affects the price in Wolvey
Prices start from £350. We don’t charge extra for travel to Wolvey. The price comes down to:
- Where the damage is and how we get to it
- Whether we combine several jobs
- What the surface is made of
- How hard the colour is to match
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Where you are, by postcode
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Landlord and trade work in Wolvey
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Your questions about bath re-enamelling in Wolvey
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we will quote them together.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Covering Wolvey
Wolvey is about 4 miles south of Hinckley, in Leicestershire. Anywhere in LE10, a technician comes to you. We cover all 287 towns and villages in Leicestershire. You can also see our page for Birmingham, about 22 miles away.
All of LE10 is covered. Whether you live on Hall Road, Bulkington Road and Wolvey Hall Farm Close or a nearby road, a technician can come to you. We also cover the places around Wolvey: Wolvey Heath (1 mile north-east), Copston Magna (2 miles east), Withybrook (2 miles south), Hopsford (2 miles south) and Monks Kirby (4 miles south-east). Further out, we also cover Hinckley (4 miles north), Wigston (13 miles north-east), Lutterworth (7 miles east), Blaby (10 miles north-east), Broughton Astley (7 miles north-east) and Earl Shilton (7 miles north).
Landmarks near Wolvey
We visit homes around Church of St John the Baptist and Wolvey CofE Primary School, among other places. The closest station to Wolvey is Hinckley station, about 3.4 miles north. Further afield, we also cover the area around George Eliot Hospital (4.7 miles west) and Hinckley and District Museum (3.9 miles north).
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Nearby places to Wolvey
More services for Wolvey
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Ensure the area is dry
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
Get a quote
For a price in Wolvey, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
How to look after the repair
To keep it looking its best:
- Do not let dyes or oils sit on the finish
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
