Devon · England
Bath Re-enamelling for Woolacombe homes
Fixed-price bath re-enamelling in Woolacombe and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Stains that won’t shift
- Lots of chips and rust spots
How we handle bath re-enamelling in Woolacombe
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a coloured bath you want in white and enamel that’s lost its shine and feels rough, we can help.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Woolacombe (EX34)
- Region
- Devon
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Signs you need bath re-enamelling in Woolacombe
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
You may need us if you’ve spotted any of these:
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Comparing quotes
- Who will actually do the work
- A fixed price, and whether VAT is included
- What happens if they find more damage
- What preparation is included
Covering Woolacombe
Woolacombe is about 9 miles north-west of Barnstaple, in Devon. Our technicians come to homes and businesses in Woolacombe and the surrounding area, so nothing has to leave your home. Woolacombe is one of 586 towns and villages in Devon we cover.
Our technicians cover all of EX34. Whether you live on Mortehoe Station Road, Woolacombe Station Road and Western Rise or a nearby road, a technician can come to you. We also cover the places around Woolacombe: Trimstone (2 miles east), Bradwell (2 miles east), North Buckland (2 miles south-east), Georgeham (3 miles south) and Darracott (3 miles south). We also work in nearby towns such as Barnstaple (9 miles south-east), Bideford (11 miles south), Ilfracombe (4 miles north-east), Braunton (5 miles south), Newport (10 miles south-east) and Roundswell (9 miles south-east).
What’s near Woolacombe
Around Woolacombe, we work in homes near Church of St Sabinus (Woolacombe Church), Woolacombe School and The Camberley pub. A little further out are Mortehoe Museum (0.9 miles north-west). Open spaces near Woolacombe include Chapel wood.
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why us?
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
- Repair technicians who travel to you, UK-wide
Take a look at our pricing and resurfacing vs replacement cost guide.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow the best part of a day. Before we go, we will explain when it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Before we arrive
- Open a window if you can
- Let us know if it has been repaired before
- Let us know about parking or access
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Read more
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Places near Woolacombe
More services for Woolacombe
Your questions about bath re-enamelling in Woolacombe
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
How much does bath re-enamelling cost in Woolacombe?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do you cover Woolacombe?
We do. Repair technicians travel to Woolacombe from across the region, with no extra charge for travel.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
We charge the same wherever you are, so there’s no premium for Woolacombe. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- Any earlier repairs or coatings
- Any details about the material
- A picture taken from further back
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
What we can’t put right
A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Woolacombe
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Looking after it afterwards
Nothing complicated is needed:
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Never use suction bath mats
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
