Devon · England
Bath re-enamelling & resurfacing in Georgeham, Devon
Problem with your bath in Georgeham? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
Georgeham and the surrounding area
Georgeham is about 7 miles north-west of Barnstaple, in Devon. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 586 places in Devon.
Here we cover the EX33 postcode area. You will find streets such as Church Road, Chapel Street and Newberry Road. Other places close to Georgeham include Darracott (1 mile south-east), North Buckland (1 mile east), Nethercott (1 mile east), Knowle (2 miles south-east) and Middle Winsham (2 miles east). Further out, we also cover Barnstaple (7 miles south-east), Bideford (8 miles south), Ilfracombe (6 miles north-east), Newport (8 miles south-east), Roundswell (7 miles south-east) and East-the-Water (8 miles south).
Landmarks near Georgeham
Around Georgeham, we work in homes near Georgeham Church of England (VC) Primary School, Kings Arms and Church of St George, among other places. A little further out are Braunton and District Museum (2.4 miles south-east). For a walk, there’s Braunton Burrows and Chapel wood.
Bath re-enamelling at your home in Georgeham
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on basins & shower trays, pressed steel baths and cast iron baths, and the jobs we see most are several chips and rust patches and thin, worn enamel in places.
We stand behind the work with a one-year guarantee.
- Where
- Georgeham (EX33)
- County
- Devon
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- A bath split right through the body
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Questions from Georgeham
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
What happens after I send pictures?
You’ll get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
How long will the bath be out of use?
One day for most baths and can be used the day after. We give you timings with the quote.
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Whether old repairs or coatings need taking off
- Access to the area
- How many areas need work
- How hard the colour is to match
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
How to get a fixed price
Phone photos are fine. Ensure they show:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- Natural light rather than flash
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say immediately if a repair is the right fix.
Also near Georgeham
Also in Georgeham
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Don’t use the bath until it has fully cured
- Never use suction bath mats
- Have chips seen to early
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It generally takes a full day, and you are welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
How to prepare
- Open a window if you can
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Getting a price
Most customers in Georgeham get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
Do you need bath re-enamelling in Georgeham?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Get in touch if you’ve noticed any of these:
- A coloured bath you want in white
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- Stains that will not shift
What to look for in a quote
- What aftercare is recommended
- Whether a trained technician does the job
- Whether the price covers travel
- How changes to the job are handled
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Devon and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly work with letting and managing agents. Send the address, pictures and access details.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
