Devon · England
Bath re-enamelling & resurfacing in Nethercott, Devon
Full bath re-enamelling and resurfacing at your home in Nethercott, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that’s seen better days
- An old resurfacing that’s failing
Bath re-enamelling in Nethercott without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include wear marks under the taps and staining under the taps and around the waste, on Victorian roll-tops, acrylic baths and cast iron baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Location
- Nethercott (EX33)
- Area hub
- Devon
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Nethercott
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Previous DIY repairs that have to come out
- What the surface is made of
- Unusual colours or finishes
- How many areas need work
Our prices are the same across the UK, with no extra for Nethercott. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Something in shot to show the size
- Any earlier repairs or coatings
- One sharp close-up of the damage
- What it’s made of, if you know
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Honest limits
It helps to know what we can’t do:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Landlords, agents and businesses in Nethercott
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Nethercott, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Nethercott and nearby
Nethercott is about 6 miles north-west of Barnstaple, in Devon. Our repair technicians come to customers in Nethercott, so nothing has to leave your home. Nethercott is one of 586 towns and villages in Devon where we work.
Here we cover the EX33 postcode area. We also cover the places around Nethercott: Knowle (1 mile south-east), North Buckland (1 mile north-west), Middle Winsham (1 mile east), Darracott (1 mile west) and Georgeham (1 mile west). Larger places within reach include Barnstaple (6 miles south-east), Bideford (8 miles south), Ilfracombe (5 miles north), Newport (7 miles south-east), Roundswell (6 miles south-east) and East-the-Water (8 miles south).
What’s near Nethercott
Around Nethercott, we work in homes near Ebrington Arms and Braunton Academy and the streets around them. Well-known places in the area include North Devon District Hospital (5.7 miles south-east) and Braunton and District Museum (1.7 miles south). Green spaces nearby include Braunton Burrows and Chapel wood.
Nearby places to Nethercott
What else we do in Nethercott
FAQs for Nethercott
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Which areas do you work in?
Everywhere in the UK, Nethercott included. Travel is included in the price.
Can you do the outside of a roll-top?
Yes. Inside and out.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and we will quote them together.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. On site, it takes most of the day. We leave the room clean and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
Before we arrive
- Let us know which floor the room is on
- Make sure the room can be ventilated
- Point us to the nearest place to park
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Advice
Common problems we fix in Nethercott
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Contact us if you’ve noticed:
- Staining under the taps and around the waste
- A coating lifting around the plughole
- Several chips and rust patches
- A period or roll-top bath worth keeping
What to look for in a quote
- What the guarantee covers, and for how long
- How the colour is matched
- Whether a trained technician does the job
- What aftercare is recommended
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
How to look after the repair
So the finish stays in good condition:
- Never use suction bath mats
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Do not leave a chip unrepaired
Wipe the bath dry after use where you can, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
