Gloucestershire · England
Bath re-enamelling & resurfacing in Woolstone, Gloucestershire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Woolstone. Send photos for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Woolstone
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for chips and rust in more than one place and staining under the taps and around the waste, in pressed steel baths, acrylic baths and basins & shower trays.
You get a one-year guarantee, the same in Woolstone as everywhere else we work.
- Area
- Woolstone (GL52)
- Region
- Gloucestershire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. We don’t charge extra for travel to Woolstone. The price comes down to:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Unusual colours or finishes
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- The material, if you know it
- Your postcode, so we can check dates
- A picture taken from further back
- A coin or ruler next to the damage for scale
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Landlord and trade work in Woolstone
Landlords, letting agents and housing providers in Woolstone use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Do you need bath re-enamelling in Woolstone?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.
People normally call us when they notice one of these:
- Stains that will not shift
- A coloured bath you want in white
- A roll-top that is seen better days
- Wear marks under the taps
Before you book anyone
- How your room will be protected
- How to look after the finish
- What prep work is covered
- Whether there are any call-out or travel charges
Where we work around Woolstone
Woolstone is about 1 mile north of Bishop's Cleeve, in Gloucestershire. From the centre of Woolstone to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Woolstone is one of 470 towns and villages in Gloucestershire we cover. Our jobs stretch from Woolstone to Birmingham (about 35 miles away).
All of GL52 is within our area, from the main roads to the quietest streets. Whether you live on Shutter Lane, Malleson Road and Woolstone Lane or a nearby road, we can come to you. Other places close to Woolstone include Gotherington (1 mile south), Bishop's Cleeve (1 mile south), Teddington (2 miles north), Woodmancote (2 miles south) and Cleeve Hill (2 miles south-east). Within a short drive, we also cover Cheltenham (5 miles south), Gloucester (11 miles south-west), Tewkesbury (4 miles west), St Paul's (5 miles south), Lansdown (5 miles south) and Fairview (5 miles south).
Around Woolstone
In Woolstone, that means homes near Gotherington Primary School, Cleeve School and Church of St Martin De Tours and the streets around them. The closest station to Woolstone is Ashchurch for Tewkesbury station, roughly 2.9 miles north-west. Nearby you’ll also find Winchcombe Castle (4.2 miles east) and Cheltenham General Hospital (5.4 miles south). Green spaces nearby include Nottingham Hill and Beckford Nature Reserve.
FAQs for Woolstone
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do you come to Woolstone?
We do. We send a technician to Woolstone for every job, and the price is the same as everywhere else.
What happens once I’ve sent pictures?
We come back with a fixed price, typically with dates to choose from. There is no obligation to book.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
How long is the bath unusable?
Usually one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Woolstone
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Also near Woolstone
What else we do in Woolstone
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Free fixed quotes from pictures
- One price list for the entire UK
- We’ll tell you if it’s not worth repairing
- Rooms protected and left tidy
See our full price list and resurfacing vs replacement cost guide.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Make sure the room can be ventilated
How to get a price
The quickest way to a price is to send two or three pictures using our quote form or call us. We will say straight away if a repair is the right fix.
Read more
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
