Gloucestershire · England
Bath re-enamelling & resurfacing in Woodmancote, Gloucestershire
Bath re-enamelling in and around Woodmancote: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Woodmancote
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Common call-outs are for a coloured bath you want in white and stains that won’t shift, in cast iron baths, Victorian roll-tops and pressed steel baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Woodmancote (GL52)
- Region
- Gloucestershire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Respect the curing time we give you
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Also near Woodmancote
Also in Woodmancote
Woodmancote and nearby
Woodmancote is about 1 mile east of Bishop's Cleeve, in Gloucestershire. Customers in Woodmancote get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Our repair technicians cover all 470 towns and villages in Gloucestershire. Our nearest city page is Birmingham, about 37 miles away.
Every address in GL52 is covered. Streets in the area include Station Road, Cotswold View and Chapel Lane. Neighbouring places we cover include Cleeve Hill (1 mile east), Bishop's Cleeve (1 mile west), Southam (1 mile south), Gotherington (1 mile north) and Woolstone (2 miles north). Within a short drive, we also cover Cheltenham (4 miles south-west), Gloucester (10 miles south-west), Tewkesbury (5 miles north-west), St Paul's (3 miles south-west), Lansdown (4 miles south) and Fairview (3 miles south).
Around Woodmancote
Our customers here include homes close to Cleeve School, Woodmancote School and St Michael & All Angels Church, among other places. Woodmancote’s nearest station is Cheltenham Spa station, about 4.1 miles south-west. Other landmarks nearby include The Bugatti Trust Museum (1.4 miles north-east) and Winchcombe Castle (3.4 miles east). Open spaces near Woodmancote include Nottingham Hill.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- Where the damage is and how we get to it
- How many items we do on one visit
- What the surface is made of
- What kind of damage it is
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- Any details about the material
- Any earlier repairs or coatings
- A photo taken from further back
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- We will tell you if it’s not worth repairing
- Most jobs done in one visit
- One-year guarantee on every repair
- Colour-matched on site
Read our full price list or resurfacing vs replacement cost guide.
What we do, step by step
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know which floor the room is on
- Let us know about parking or access
- Tell us about any previous repairs or coatings
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Signs you need bath re-enamelling in Woodmancote
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Contact us if you’ve noticed any of these:
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- A coloured bath you want in white
- Chips and rust in more than one place
Questions to ask before booking
- How the colour is matched
- Aftercare advice
- How long it needs to cure
- A fixed price, and whether VAT is included
Woodmancote questions
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will the price change on the day?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What happens once I’ve sent photos?
We come back with a fixed price. You are under no obligation.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
