East Riding of Yorkshire · England
Bath Re-enamelling in Wormley Hill
Damaged bath in Wormley Hill? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Bath re-enamelling in Wormley Hill without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. We work on Victorian roll-tops, acrylic baths and pressed steel baths, and people most frequently call us about brown or grey marks that don’t clean off and a period or roll-top bath worth keeping.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Wormley Hill (DN14)
- County
- East Riding of Yorkshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Wormley Hill and nearby
Wormley Hill is about 2 miles north-west of Thorne, in East Riding of Yorkshire. Wherever you are in the DN14 postcode area, we come to you. We cover all 299 towns and villages in East Riding of Yorkshire. You can also see our page for Leeds, about 26 miles away.
We work across the DN14 postcode area and the streets around it. Close by, we cover Pincheon Green (1 mile north-west), Fishlake (2 miles south-west), Moorends (2 miles east), Far Bank (2 miles south-west) and Thorne (2 miles south-east). Larger places within reach include Goole (7 miles north-east), Howden (9 miles north-east), Snaith (4 miles north), Gilberdyke (13 miles north-east), Eggborough (8 miles north-west) and Carlton (5 miles north).
Around Wormley Hill
Our customers here include homes close to Trinity Academy and the streets around them. Wormley Hill’s nearest station is Thorne North station, roughly 1.7 miles south-east of the centre.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Avoid suction-cup mats
- Repair dripping taps early
- Store bottles off the bath
- Do not leave a chip unrepaired
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What we can’t put right
Before you book, it’s worth knowing the limits:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly before you book.
What we work on
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- What kind of damage it is
- How many areas need work
- What the surface is made of
- How easy the damage is to reach
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- One picture of the whole bath
- Details of any past repairs
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Repair or replace in Wormley Hill?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Wormley Hill clients choose us
- Everything repaired in place
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- One visit for most repairs
Take a look at our prices page or bath cost comparison.
Also in Wormley Hill
What we are called out for in Wormley Hill
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Look out for these signs:
- Worn patches where water runs and sits
- An old resurfacing that is failing
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
Before you book anyone
- How long the guarantee is and what it covers
- What prep work is covered
- Whether the colour is mixed to match
- How the room is protected while they work
Questions from Wormley Hill
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Do you come to Wormley Hill?
We do. Technicians travel to Wormley Hill from across the region, and the price is the same as everywhere else.
Can you quote from pictures?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
How do I book?
Send photos through the quote form or call 0345 017 0787.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the next day.
How to prepare
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
- Ensure the area is dry
Getting a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
