Worcestershire · England
Bath Re-enamelling for Worms Ash homes
Damaged bath in Worms Ash? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- An original cast iron bath that needs restoring
Bath re-enamelling in Worms Ash without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re frequently asked to fix a coloured bath you want in white and a coating lifting around the plughole, across acrylic baths, cast iron baths and Victorian roll-tops.
A one-year guarantee comes as standard.
- Location
- Worms Ash (B61)
- County
- Worcestershire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Covering Worms Ash
Worms Ash is about 2 miles north-west of Bromsgrove, in Worcestershire. Jobs in Worms Ash are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 376 places across Worcestershire. We work right across the region, from Worms Ash to Birmingham (11 miles away).
Here we cover the B61 postcode area. Streets in the area include Brimstone Lane and Alfreds Well, and we cover them all. We also travel to Bournheath (1 mile north), Perryfields (1 mile south-east), Park Gate (1 mile south-west), Sidemoor (1 mile south-east) and Fairfield (1 mile north). Further out, we also cover Worcester (12 miles south-west), Redditch (7 miles south-east), Kidderminster (7 miles west), Droitwich Spa (7 miles south-west), Stourport-on-Severn (9 miles west) and Bewdley (10 miles west).
Local landmarks in Worms Ash
Our customers here include homes close to The Dodford Inn, Dodford First School and Church of the Holy Trinity and St Mary, among other places. Worms Ash’s nearest station is Bromsgrove station, about 2.8 miles south-east of the centre. Further afield, we also cover the area around Barnsley Hall Hospital (1 mile east) and Norton Collection Museum (1.6 miles south-east). Open spaces near Worms Ash include Chaddesley Woods National Nature Reserve and Bilberry Hill.
Worms Ash questions
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you come to Worms Ash?
We do. Repair technicians travel to Worms Ash from across the region, and the price is the same as everywhere else.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- Where the damage is and how we get to it
- What the surface is made of
- How many areas need work
- Previous DIY repairs that have to come out
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Before you send pictures, these tips help us give you a firm price:
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A picture taken from further back
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- Keep toiletries on a shelf rather than in the bath
- Have chips seen to early
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What a repair cannot fix
We will not take on work that won’t last, so these are the limits:
- Holes rusted through the metal
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Repair or replace in Worms Ash?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Worms Ash customers choose us
- A fixed quote before booking
- Same prices wherever you are
- Most jobs done in one visit
- Nothing taken out or refitted
See our full price list or bath cost comparison.
The process
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take the best part of a day, and you’re welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Getting ready for the visit
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
Getting a price
For a price in Worms Ash, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Landlords, agents and businesses in Worms Ash
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Common problems we fix in Worms Ash
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Common reasons people in Worms Ash contact us are:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
What your quote should include
- How to care for the finish
- Who turns up on the day
- How your room will be protected
- What prep work is covered
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Nearby places to Worms Ash
More services for Worms Ash
About our accreditations · Every repair comes with a one-year guarantee.
