Worcestershire · England
Bath re-enamelling & resurfacing in Bournheath, Worcestershire
We travel to Bournheath for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that will not shift
How we handle bath re-enamelling in Bournheath
We don’t move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. We regularly repair pressed steel baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are several chips and rust patches and a roll-top that’s seen better days.
All our work comes with our one-year guarantee.
- Where
- Bournheath (B61)
- County
- Worcestershire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Bournheath
Bournheath is about 2 miles north of Bromsgrove, in Worcestershire. Across the B61 area, we carry out the work at your property. Our technicians cover 376 places in Worcestershire. Our nearest city page is Birmingham, about 11 miles away.
Here we cover the B61 postcode area. From Doctors Hill, Dodford Road and Fairfield Road or a nearby road, we can come to you. Nearby, we also work in Worms Ash (1 mile south), Fairfield (1 mile north), Catshill (1 mile east), Perryfields (1 mile south) and Wildmoor (1 mile north-east). Further out, we also cover Worcester (13 miles south-west), Redditch (7 miles south-east), Kidderminster (7 miles west), Droitwich Spa (8 miles south-west), Stourport-on-Severn (9 miles west) and Bewdley (10 miles west).
Local landmarks in Bournheath
Locally, our jobs take us to homes close to North Bromsgrove High School, The Dodford Inn and Fairfield First School, among other places. The closest station to Bournheath is Bromsgrove station, roughly 3.2 miles south. Other landmarks nearby include Castlebourne folly (1.9 miles north) and Norton Collection Museum (1.9 miles south-east). Not far away are Chaddesley Woods National Nature Reserve and Bilberry Hill.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs immediately
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
Wipe the bath dry after use where you can, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Bournheath: your questions answered
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Do you cover the entire of Worcestershire?
We work UK-wide, so Bournheath is covered. Prices do not change with location.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How long is the bath unusable?
Usually one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- A bath that’s rusted through
- Acrylic that moves when you stand in it
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Access to the area
- The size and number of damaged areas
- Whether we combine several jobs
The price reflects the work involved, not your postcode. The full price is agreed before you book.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- Natural light rather than flash
- The material, if you know it
Upload a picture of the damage and one of the entire item, with your B61 postcode, and we will reply with a fixed price.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
When to call us in Bournheath
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Keep an eye out for these signs:
- A coloured bath you want in white
- Worn patches where water runs and sits
- An old resurfacing that is failing
- A dull, rough surface that won’t come clean
What to look for in a quote
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
- How long it needs to cure
The process
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Keep a parking space free if you can
- Ensure the room can be ventilated
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
Repairing versus replacing in Bournheath
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why Bournheath customers choose us
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Same prices wherever you are
- Fixed prices from your pictures
Read our prices page or resurfacing vs replacement cost guide.
Nearby places to Bournheath
Other services in Bournheath
About our accreditations · Every repair comes with a one-year guarantee.
