Devon · England
Bath Re-enamelling in Wrangaton
Fixed-price bath re-enamelling in Wrangaton and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- An old resurfacing that is failing
How we handle bath re-enamelling in Wrangaton
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. Common call-outs are for thin, worn enamel in places and a peeling or bubbling previous coating, on cast iron baths, acrylic baths and basins & shower trays.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Where
- Wrangaton (TQ10)
- Region
- Devon
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
Some jobs are not right for a repair, including:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Landlord and trade work in Wrangaton
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs in Devon and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What we are called out for in Wrangaton
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
You may need us if you’ve spotted:
- Wear marks under the taps
- A roll-top that is seen better days
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
What your quote should include
- What happens if they find more damage
- What prep work is covered
- How the colour is matched
- Whether the price is fixed and includes VAT
Your questions about bath re-enamelling in Wrangaton
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Repairing versus replacing in Wrangaton
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why choose Surface Doctor in Wrangaton
- Free fixed quotes from pictures
- Usually one visit, start to finish
- Colour-matched on site
- Rooms protected and left tidy
See our prices page or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Wrangaton. The price depends on:
- Where the damage is and how we get to it
- How many areas need work
- What kind of damage it is
- Whether old repairs or coatings need taking off
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Two or three clear pictures are usually enough. Try to include:
- Something in shot to show the size
- What it’s made of, if you know
- A clear, close picture of the problem area
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Our work in Wrangaton
Wrangaton is about 12 miles east of Plymouth, in Devon. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Wrangaton is one of 586 places in Devon we cover.
Jobs in TQ10 are booked in the same way as anywhere else. You’ll find streets such as Southmoor Rise, Creber Drive and Siding Cross, and we cover them all. We also cover the places around Wrangaton: Cheston (1 mile north), Moorhaven Village (1 mile west), Bittaford (1 mile south-west), Ugborough (1 mile south) and Aish (2 miles north). We also work in nearby towns such as Newton Abbot (14 miles north-east), Kingsteignton (15 miles north-east), Ivybridge (3 miles west), Totnes (8 miles east), Bovey Tracey (15 miles north-east) and Dartmouth (13 miles east).
Near you in Wrangaton
Around Wrangaton, we work in homes near Ugborough Primary School and Horse & Groom pub and the streets around them. The nearest railway station is Ivybridge station, roughly 2.2 miles west. A little further out are Moorhaven Hospital (1 mile west). For a walk, there is Butterdon Hill and Andrew's Wood.
Places near Wrangaton
What else we do in Wrangaton
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Wash away dyes and oils after use
- Have chips seen to early
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
How the visit works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
