Devon · England

Bath re-enamelling & resurfacing in South Brent, Devon

Full bath re-enamelling and resurfacing for homes and businesses in South Brent and across Devon. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in South Brent

About our bath re-enamelling in South Brent

If your bath is sound but looks tired, re-enamelling is generally the most cost-effective option. There is no removal, plumbing or tiling involved. Whether it’s a peeling or bubbling previous coating and chips and rust in more than one place, we can generally put it right, on cast iron baths, Victorian roll-tops and pressed steel baths alike.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

Area
South Brent (TQ10)
Region
Devon
Guarantee
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Honest limits

It helps to know what we cannot do:

  • A bath that is rusted through
  • A bath split right through the body
  • Acrylic that moves when you stand in it

Send us pictures and we will tell you honestly.

Materials we work on in South Brent

  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths

Landlords, agents and businesses in South Brent

We regularly work with letting and managing agents. Send the address, photos and access details.

Landlords, letting agents and housing providers in South Brent use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

Questions from South Brent

Is my repair covered?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Is a repair better than a new one?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Does re-enamelling smell?

Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.

Can you fix a peeling bath coating?

In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Devon.

Common problems we fix in South Brent

Hard water speeds up the wear, and abrasive cleaners do the most damage.

It’s worth getting a quote if you see:

  • Wear marks under the taps
  • Stains that will not shift
  • An original cast iron bath that needs restoring
  • A coloured bath you want in white

What to look for in a quote

  • A fixed price, and whether VAT is included
  • If travel is included in the price
  • How to care for the finish
  • What happens if they find more damage

Our hiring checklist

Materials and what they mean for the repair

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Looking after it afterwards

To keep it looking its best for years:

  • Leave the bath for the full curing time before using it
  • Keep toiletries on a shelf rather than in the bath
  • Keep suction mats out of the bath
  • Get any chip repaired quickly

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

The process

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the following day, the bath is ready.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Let us know if it has been repaired before
  • Let us know which floor the room is on

How to get a price

Email us pictures of the damage and one of the entire item, and tell us you are in South Brent, and we’ll come back with a fixed quote.

Send photos for a quote

Related advice

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

About South Brent

South Brent is about 12 miles west of Paignton, in Devon. We visit homes and businesses in South Brent and the surrounding area, so nothing has to leave your home. South Brent is one of 586 places in Devon where we work.

All of TQ10 is covered. From Station Road, Wellington Square and Totnes Road or anywhere nearby, we can come to you. Neighbouring places we cover include Aish (1 mile north-west), Avonwick (1 mile south-east), Cheston (1 mile south-west), Wrangaton (2 miles south-west) and Moorhaven Village (3 miles south-west). Larger places within reach include Newton Abbot (12 miles north-east), Kingsteignton (14 miles north-east), Ivybridge (5 miles south-west), Totnes (6 miles east), Bovey Tracey (13 miles north-east) and Dartmouth (12 miles south-east).

Local landmarks in South Brent

In South Brent, that means homes near South Brent Primary School, South Brent Methodist Church and Pack Horse pub, among other places. South Brent’s nearest station is Ivybridge station, roughly 3.9 miles south-west of the centre. Nearby you’ll also find Moorhaven Hospital (2.7 miles south-west). Not far away are Butterdon Hill.

Map of South Brent © OpenStreetMap contributors

Repairing versus replacing in South Brent

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.

Why choose Surface Doctor in South Brent

  • Colour-matched on site
  • Dust sheets down, tidy finish
  • One price list for the whole UK
  • Straight answers about what a repair can do

Read our pricing or guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.