North Lincolnshire · England
Bath Re-enamelling for Wroot homes
Bath re-enamelling across Wroot and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Several chips and rust patches
- A bath that stays dull however much you clean it
Bath re-enamelling in Wroot, done in place
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include enamel that’s lost its shine and feels rough and wear marks under the taps, across acrylic baths, cast iron baths and pressed steel baths.
Big or small, it’s backed by a one-year guarantee.
- Area
- Wroot (DN9)
- County
- North Lincolnshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Wroot
Wroot is about 7 miles south of Thorne, in North Lincolnshire. Our repair technicians come to customers in Wroot, so there is no workshop to go to. Our technicians cover all 90 towns and villages across North Lincolnshire. You can also see our page for Leeds, about 33 miles away.
All of DN9 is within our area. You’ll find streets such as High Street, Firth Lane and Field Lane, all of which we cover. Other places close to Wroot include Blaxton (3 miles south-west), Westwoodside (3 miles south-east), Finningley (4 miles south-west), Sandtoft (4 miles north-east) and Stockholes Turbary (4 miles north-east). Further out, we also cover Scunthorpe (12 miles east), Bottesford (11 miles east), Frodingham (12 miles north-east), Crosby (12 miles north-east), Epworth (4 miles east) and Yaddlethorpe (11 miles east).
Local landmarks in Wroot
In Wroot, that means homes near St Pancras and Wroot Travis Charity Church of England Primary School. Well-known places in the area include Haywain Farm Museum (3.7 miles east).
Wroot: your questions answered
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Do you work in Wroot?
Yes, we do. We send a technician to Wroot for every job, with no extra charge for travel.
Do you cover the whole of North Lincolnshire?
Across the UK. Prices do not change with location.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Repair or replace: which is better?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before you book.
Why us?
- Colours mixed by hand to suit your surface
- Work done at your home or business
- Same prices wherever you are
- Fixed prices from your pictures
Take a look at our prices page and bath cost comparison.
Nearby places to Wroot
Other services in Wroot
When to call us in Wroot
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Get in touch if you’ve noticed any of these:
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Several chips and rust patches
- An outdated colour you’d like to change
Before booking anyone
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes a full day. If anything looks different from your pictures, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Clear the area around the damage
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Ask for a price
Most clients in Wroot get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Store bottles off the bath
- A quick wipe after use keeps limescale away
- Do not use the bath until it has fully cured
- Avoid suction-cup mats
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- What kind of damage it is
- Access to the area
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- A wider photo showing the entire bath
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
