Isle of Wight · England
Bath re-enamelling & resurfacing in Wroxall, Isle of Wight
Bath re-enamelling in Wroxall without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
The process
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
- Ensure the area is dry
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
Advice
About our bath re-enamelling in Wroxall
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with thin, worn enamel in places and an outdated colour you’d like to change, we can typically put it right, whatever the material.
All our work is covered by a one-year guarantee.
- Where
- Wroxall (PO38)
- County
- Isle of Wight
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Your questions about bath re-enamelling in Wroxall
Can you quote from pictures?
Normally, yes. Clear photos let us give you a fixed price without visiting.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Are there extra charges for Wroxall?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
Which areas do you work in?
We work UK-wide. Prices do not change with location.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What we cannot put right
A repair is not right for every job, including:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
What we’re called out for in Wroxall
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- A dull, rough surface that will not come clean
- Stains that will not shift
- A bath in a colour that no longer suits
- Thin, worn enamel in places
Before you book anyone
- If travel is included in the price
- Who will actually do the work
- Whether cleaning and preparation are in the price
- Aftercare advice
What affects the price in Wroxall
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How easy the damage is to reach
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Doing more than one item at once
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- A close-up of the damage, in focus
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Repair or replace in Wroxall?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Wroxall customers choose us
- A year’s guarantee on all work
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- A fixed quote before booking
Read our prices page and bath cost comparison.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Aftercare tips
How the surface is treated afterwards matters:
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
- Do not let dyes or oils sit on the finish
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
About Wroxall
Wroxall is about 7 miles south-east of Newport, in Isle of Wight. Clients in Wroxall get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Wroxall is one of 125 places in Isle of Wight where we work. Our jobs stretch from Wroxall to London (about 78 miles away).
Our repair technicians cover all of the PO38 postcode area and the streets around it. Jobs here include addresses on Station Road, High Street and St Martins Road. Wroxall is on the B3327, so it’s easy for us to reach. Nearby, we also work in Whiteley Bank (1 mile north), Sandford (1 mile north-west), Nettlecombe (2 miles south-west), Princelett (2 miles north) and Godshill (2 miles north-west). Within a short drive, we also cover Newport (7 miles north-west), Ryde (8 miles north), Cowes (10 miles north), Sandown (4 miles north-east), East Cowes (10 miles north) and Oakfield (8 miles north). Remote and island addresses take a little more planning, so it’s best to call first.
Landmarks near Wroxall
In Wroxall, that means homes near Wroxall Primary School, St John's Church and The Island Free School, among other places. Wroxall’s nearest station is Shanklin station, about 2.2 miles north-east. Nearby you’ll also find Sandown Castle (4.3 miles north-east) and South Wight (1.5 miles south-east). For a walk, there is Stenbury Down and Alverstone Mead.
Places near Wroxall
Also in Wroxall
About our accreditations · Every repair comes with a one-year guarantee.
