Hampshire · England
Bath re-enamelling & resurfacing in Wyck, Hampshire
Problem with your bath in Wyck? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Lots of chips and rust spots
Bath re-enamelling at your home in Wyck
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s brown or grey marks that don’t clean off and lots of chips and rust spots, we can normally put it right, on basins & shower trays, pressed steel baths and Victorian roll-tops alike.
We stand behind the work with a one-year guarantee.
- Location
- Wyck (GU34)
- County
- Hampshire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Wyck and the surrounding area
Wyck is about 3 miles east of Alton, in Hampshire. Jobs in Wyck are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Wyck is one of 683 places in Hampshire we cover. You can also see our page for London, about 43 miles away.
Here we cover the GU34 postcode area. Nearby, we also work in East Worldham (1 mile south-west), Neatham (1 mile north-west), Holybourne (2 miles north-west), Upper Froyle (2 miles north) and Hartley Mauditt (2 miles south-west). Within a short drive, we also cover Basingstoke (11 miles north-west), Farnborough (12 miles north-east), Fleet (9 miles north), Aldershot (10 miles north-east), Alton (3 miles west) and Petersfield (10 miles south).
Local landmarks in Wyck
Typical jobs here are in homes near Eggar's School, Church of St Mary and Binsted Church of England Primary School, among other places. The closest station to Wyck is Alton station, about 2.2 miles west of the centre. Nearby you’ll also find Alton Community Hospital (3.2 miles west) and Barley Pound (5 miles north-east). Open spaces near Wyck include Deadwater Valley and Holybourne Hill.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Nearby places to Wyck
Other services in Wyck
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The colour and finish to match
- The type of damage
- Access to the area
- Any earlier repairs that need removing first
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Any details about the material
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
Most clients in Wyck get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
When to call us in Wyck
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
It’s worth getting a quote if you see:
- Wear marks under the taps
- Brown or grey marks that don’t clean off
- An outdated colour you’d like to change
- A coating lifting around the plughole
Questions to ask before you book
- How changes to the job are handled
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
- What protection goes down before work starts
Wyck questions
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the following day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
What we can’t put right
Some jobs are not right for a repair, for example:
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Landlord and trade work in Wyck
If you manage property in Wyck, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
