Leicestershire · England
Bath Re-enamelling in Wycomb
Bath re-enamelling for Wycomb, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It normally takes the best part of a day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Bath re-enamelling in Wycomb, done in place
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. We are often asked to fix lots of chips and rust spots and enamel that’s lost its shine and feels rough, across acrylic baths, basins & shower trays and cast iron baths.
Every repair is covered by our one-year guarantee.
- Area
- Wycomb (LE14)
- Region
- Leicestershire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to care for the repair
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs straight away
- A dripping tap should be fixed promptly
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Covering Wycomb
Wycomb is about 4 miles north-east of Melton Mowbray, in Leicestershire. Jobs in Wycomb are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our technicians cover all 287 towns and villages across Leicestershire, from the larger towns to small villages. We work right across the region, from Wycomb to Birmingham (about 50 miles away).
We cover every part of the LE14 postcode area and the streets around it. That includes homes on Wycomb Lane and Pickards Lane. Neighbouring places we cover include Scalford (1 mile south-west), Goadby Marwood (1 mile north-east), Waltham on the Wolds (2 miles east), Eastwell (2 miles north) and Eaton (3 miles north-east). Larger places within reach include Melton Mowbray (4 miles south-west), Syston (13 miles south-west), Shelthorpe (15 miles west), Sileby (12 miles south-west), East Leake (14 miles west) and Mountsorrel (14 miles south-west).
Landmarks near Wycomb
Our customers here include homes close to Scalford Church of England Primary School, Kings Arms and Church of St Mary and the streets around them. The nearest railway station is Melton Mowbray station, roughly 4.1 miles south of the centre. Well-known places in the area include Thorpe Arnold (3.1 miles south). Green spaces nearby include Ankle Hill.
Towns and villages near Wycomb
More services for Wycomb
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
What affects the price in Wycomb
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- Whether old repairs or coatings need taking off
- The material
- Whether we combine several jobs
- The type of damage
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- The material, if you know it
Upload a photo of the damage and a wider shot of the whole item, and tell us you are in Wycomb, and we will reply with a fixed price.
FAQs for Wycomb
How much does bath re-enamelling cost in Wycomb?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you cover the entire of Leicestershire?
Across the UK, so Wycomb is covered. Prices don’t change with location.
Honest limits
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think before you book.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Signs you need bath re-enamelling in Wycomb
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Look out for these signs:
- A roll-top that is seen better days
- Thin, worn enamel in places
- A coating lifting around the plughole
- Several chips and rust patches
Questions to ask before you book
- How changes to the job are handled
- A fixed price, and whether VAT is included
- What preparation is included
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
