Lincolnshire · England
Bath re-enamelling & resurfacing in Eaton, Lincolnshire
Full bath re-enamelling and resurfacing at your home in Eaton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
Your questions about bath re-enamelling in Eaton
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you cover Eaton?
Yes, we do. Technicians travel to Eaton from across the region, and the price is the same as everywhere else.
About our bath re-enamelling in Eaton
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with stains that won’t shift and a bath that stays dull however much you clean it, we can generally put it right, whatever the material.
Big or small, it’s backed by a one-year guarantee in Eaton and across Lincolnshire.
- Where
- Eaton (NG32)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We work for landlords, letting agents and housing providers in Eaton as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Also in Eaton
Eaton and nearby
Eaton is about 7 miles north-east of Melton Mowbray, in Lincolnshire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Our technicians cover all 732 towns and villages in Lincolnshire, from the larger towns to small villages. You can also see our page for Birmingham, about 52 miles away.
Postcode districts we cover here: NG32. That includes homes on Main Street, Church Lane and Chapel Street. We also travel to Eastwell (1 mile west), Goadby Marwood (2 miles south-west), Stathern (2 miles north-west), Waltham on the Wolds (3 miles south) and Wycomb (3 miles south-west). Within a short drive, we also cover Grantham (8 miles north-east), Spittlegate (8 miles north-east), Gonerby Hill Foot (8 miles north-east), Earlesfield (7 miles north-east), Great Gonerby (9 miles north-east) and Manthorpe (9 miles north-east).
Local landmarks in Eaton
Around Eaton, we work in homes near Church of St Denys and Castle Inn, among other places. Further afield, we also cover the area around Belvoir Castle (3.2 miles north-east).
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before you book. We look at:
- How many areas need work
- How easy the damage is to reach
- What kind of damage it is
- Doing more than one item at once
Our prices are the same across the UK, with no extra for Eaton. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say immediately whether it can be repaired.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Open a window if you can
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Read more
When a repair is not the answer
A repair isn’t right for every job, including:
- Steel that has corroded right through
- A bath split right through the body
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Keeping it looking good
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
What we’re called out for in Eaton
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
It’s worth getting a quote if you see:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
Before you book anyone
- How long it needs to cure
- Whether the price covers travel
- Who turns up on the day
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
