Leicestershire · England
Bath Re-enamelling for Wymeswold homes
Local bath re-enamelling for Wymeswold: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
About Wymeswold
Wymeswold is about 5 miles north-east of Loughborough, in Leicestershire. We visit clients in Wymeswold and the surrounding area, so you do not need to take anything anywhere. Wymeswold is one of 287 places in Leicestershire we cover. Our jobs stretch from Wymeswold to Birmingham (about 40 miles away).
Every address in LE12 is within our area. Jobs here include addresses on The Stockwell, Church Street and Far Street. Neighbouring places we cover include Thorpe in the Glebe (2 miles north), Rempstone (2 miles north-west), Wysall (2 miles north), Costock (3 miles north-west) and East Leake (4 miles north-west). Within a short drive, we also cover Loughborough (5 miles south-west), Wigston (15 miles south), Melton Mowbray (10 miles east), Coalville (12 miles south-west), Shepshed (8 miles west) and Syston (8 miles south).
Around Wymeswold
Our customers here include homes close to The 3 Crowns Public House, Church of St Mary and Wymeswold Church of England Primary School. The nearest railway station is Loughborough station, roughly 4.1 miles south-west.
Bath re-enamelling in Wymeswold, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Common call-outs are for thin, worn enamel in places and an outdated colour you’d like to change, in cast iron baths, basins & shower trays and Victorian roll-tops.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Wymeswold (LE12)
- County
- Leicestershire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
What we cannot put right
A few problems are outside what a surface repair can do:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Also near Wymeswold
Other services in Wymeswold
What affects the price in Wymeswold
Resurfacing from £350. There’s no charge for travel to Wymeswold. The price comes down to:
- The material and finish
- Doing more than one item at once
- Previous DIY repairs that have to come out
- Unusual colours or finishes
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- Any earlier repairs or coatings
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
- Tell us if there are stairs or a lift
Getting a price
Send us pictures of the damage and one of the entire item, with your LE12 postcode, and we’ll reply with a fixed quote.
Advice
Aftercare tips
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
- Don’t leave a chip unrepaired
- Don’t leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Common questions in Wymeswold
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Wymeswold.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
What we’re called out for in Wymeswold
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Signs it’s time to call us include:
- Worn patches where water runs and sits
- A roll-top that is seen better days
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
Comparing quotes
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- Who will actually do the work
About our accreditations · Every repair comes with a one-year guarantee.
