Isle of Wight · England
Bath Re-enamelling in Yarmouth
Bath re-enamelling in Yarmouth without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
How we handle bath re-enamelling in Yarmouth
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include a dull, rough surface that won’t come clean and wear marks under the taps, across pressed steel baths, cast iron baths and basins & shower trays.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Yarmouth (PO41)
- Area hub
- Isle of Wight
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- The material
- The type of damage
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- One picture of the entire bath
Upload a photo of the damage and one of the entire item, and tell us you’re in Yarmouth, and we will come back with a fixed quote.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Have a window or extractor fan available
How to get a price
For a price in Yarmouth, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
When a repair is not the answer
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think.
Materials we work on in Yarmouth
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Aftercare tips
So the finish stays in good condition for years:
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- Rinse off hair dye, oils and bath bombs right away
- Avoid suction-cup mats
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Other services in Yarmouth
FAQs for Yarmouth
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can you quote from pictures?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Yarmouth customers choose us
- Colour-matched on site
- Fixed prices from your photos
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
See our full price list or guide to resurfacing and replacement costs.
Common problems we fix in Yarmouth
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- Stains that won’t shift
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- An old resurfacing that’s failing
What to look for in a quote
- Whether the colour is mixed to match
- What happens if they find more damage
- How long it needs to cure
- Whether the price is fixed and includes VAT
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Landlords, agents and businesses in Yarmouth
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Covering Yarmouth
Yarmouth is about 4 miles south-east of Lymington, in Isle of Wight. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover 125 places across Isle of Wight, from the larger towns to small villages.
We work across the PO41 postcode area. From High Street, Station Road and Alma Place or anywhere nearby, we can come to you. Yarmouth is on the A3054, so it’s easy for us to reach. We also cover the places around Yarmouth: Bouldnor (1 mile east), Cranmore (2 miles east), Hamstead (3 miles east), Shalfleet (3 miles east) and East End (5 miles north). Further out, we also cover Newport (9 miles east), Ryde (15 miles east), Cowes (9 miles north-east), Sandown (15 miles east), Shanklin (15 miles east) and Ventnor (15 miles south-east). Remote and island addresses take a little more planning, so it’s best to call first.
Around Yarmouth
In Yarmouth, that means homes near Bugle Hotel, St. James' Church and Yarmouth Church of England Aided Primary School. The closest station to Yarmouth is Lymington Pier station, about 3.9 miles north of the centre. Other landmarks nearby include Yarmouth Castle (within half a mile north-west) and Ferguson Family Museum (1.2 miles south-west). Green spaces nearby include Lymington and Keyhaven Marshes Nature Reserve and Afton Down.
- Other local spots include Medina (2.4 miles south-west)
About our accreditations · Every repair comes with a one-year guarantee.
