Isle of Wight · England
Bath re-enamelling & resurfacing in Cranmore, Isle of Wight
Bath re-enamelling in Cranmore without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
Honest limits
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think.
Materials we work on in Cranmore
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
About our bath re-enamelling in Cranmore
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with enamel that’s lost its shine and feels rough and chips and rust in more than one place, we can usually put it right, whatever the material.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Cranmore (PO41)
- County
- Isle of Wight
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Cranmore customers choose us
- Work done at your home or business
- Honest advice, even when it means no job
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page or guide to resurfacing and replacement costs.
Aftercare tips
Simple care helps the repair last. Our advice:
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Our work in Cranmore
Cranmore is about 6 miles south-east of Lymington, in Isle of Wight. Across the PO41 area, we come to you. We work in all 125 towns and villages across Isle of Wight, from the larger towns to small villages. Our nearest city page is London, about 80 miles away.
Every address in PO41 is covered, from the main roads to the quietest streets. That includes homes on Solent Road, East Close and Cranmore Avenue and the roads around them. We also cover the places around Cranmore: Hamstead (1 mile north-east), Shalfleet (1 mile south-east), Bouldnor (1 mile west), Yarmouth (2 miles west) and Thorns Beach (4 miles north). Further out, we also cover Newport (6 miles east), Ryde (12 miles east), Cowes (7 miles north-east), Sandown (13 miles east), Shanklin (13 miles south-east) and Ventnor (13 miles south-east). Remote and island addresses take a little more planning, so it’s best to call first.
Around Cranmore
We visit homes around Shalfleet Church of England Primary School and the streets around them. The closest station to Cranmore is Lymington Pier station, about 4.9 miles north-west. Well-known places in the area include Calbourne Water Mill And Rural Museum (2.6 miles south-east) and Yarmouth Castle (2.4 miles west). The countryside around Cranmore includes Boldre Foreshore and Compton Down.
When to call us in Cranmore
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
People typically call us when they notice something like this:
- A coating lifting around the plughole
- Brown or grey marks that do not clean off
- Several chips and rust patches
- A coloured bath you want in white
Before booking anyone
- How soon you can use it again
- How the room is protected while they work
- A fixed quote, and whether VAT is included
- What preparation is included
FAQs for Cranmore
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do you cover the entire of Isle of Wight?
We cover the whole UK, including Cranmore and the rest of Isle of Wight. Send your postcode with your pictures and we’ll confirm dates.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How long will the bath be out of use?
Most baths are done in a day, ready the next day. We will confirm timings when we quote.
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
What else we do in Cranmore
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- What the surface is made of
- Any earlier repairs that need removing first
- Access to the area
- How hard the colour is to match
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- What it’s made of, if you know
- A photo taken from further back
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Email us a picture of the damage and one of the whole item, with your PO41 postcode, and we’ll come back with a fixed quote.
Landlord and trade work in Cranmore
Housing associations and facilities teams use us for planned and reactive repairs in Isle of Wight and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How the visit works
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to the best part of a day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
