Somerset · England

Bath Re-enamelling in Yarrow

Our repair technicians come to Yarrow for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Yarrow

How we handle bath re-enamelling in Yarrow

We don’t move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the next day. Common call-outs are for wear marks under the taps and a roll-top that’s seen better days, in Victorian roll-tops, pressed steel baths and acrylic baths.

Every repair comes with our one-year guarantee, wherever you are in Somerset.

Location
Yarrow (TA9)
County
Somerset
Cover
A year, on every repair
Quotes
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Why repair rather than replace?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Why Yarrow clients choose us

  • Every repair guaranteed for a year
  • Free fixed quotes from pictures
  • Honest advice, even when it means no job
  • Accredited with CHAS, Constructionline and SafeContractor

See our full price list and resurfacing vs replacement cost guide.

Your questions about bath re-enamelling in Yarrow

How long will the bath be out of use?

Most baths are done in a day, ready the next day. We will confirm timings when we quote.

Do you cover Yarrow?

We do. We send a technician to Yarrow for every job, with no extra charge for travel.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.

Will the new finish last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can landlords book you?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.

Keeping it looking good

To keep it looking its best for years:

  • Wipe the bath dry after use in hard water areas
  • Fix dripping taps quickly
  • Don’t use the bath until it has fully cured
  • Wash away dyes and oils after use

A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.

If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

Do you need bath re-enamelling in Yarrow?

Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

Look out for any of the following:

  • A coloured bath you want in white
  • Thin, worn enamel in places
  • Several chips and rust patches
  • A dull, rough surface that will not come clean

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • How long it needs to cure
  • What aftercare is recommended
  • What happens if the damage is worse than the photos show

10 questions to ask before booking

For landlords and businesses

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

How it works

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. We spray several coats of new enamel finish.
  5. Once cured, normally by the following day, the bath is ready.

How to prepare

  • Open a window if you can
  • Keep a parking space free if you can
  • Plan for the room to be out of bounds to pets and children

Ask for a price

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Get a free quote

Read more

What bath re-enamelling costs

Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:

  • Where the damage is and how we get to it
  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • The material and finish

Our prices are the same across the UK, with no extra for Yarrow. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from pictures

Good photos mean an accurate price. Here’s what we find most useful:

  • Where you are, by postcode
  • Details of any past repairs
  • Any details about the material
  • Something in shot to show the size

If you are in Yarrow and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Yarrow and the surrounding area

Yarrow is about 5 miles east of Burnham-on-Sea, in Somerset. Wherever you are in the TA9 postcode area, we carry out the work at your property. We work in all 640 towns and villages across Somerset, from the larger towns to small villages.

Postcode districts we cover here: TA9. Close by, we cover Mark (1 mile north), Blackford (2 miles east), Ashton (3 miles north-east), Chapel Allerton (3 miles north-east) and Stone Allerton (3 miles north-east). We also work in nearby towns such as Bridgwater (8 miles south-west), Burnham-on-Sea (5 miles west), Wells (10 miles east), Shepton Mallet (15 miles east), Street (9 miles south-east) and Glastonbury (9 miles south-east).

Landmarks near Yarrow

Typical jobs here are in homes near Church of St Mark, Hugh Sexey Church of England Middle School and Pack Horse Inn. For rail, the closest station is Highbridge & Burnham station, roughly 3.7 miles west of the centre. A little further out are Burnham on Sea War Memorial Hospital (4.8 miles west).

Map of Yarrow © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.