Devon · England

Bath Re-enamelling in Yondertown

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Yondertown. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Yondertown

What we are called out for in Yondertown

Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.

Common reasons people in Yondertown contact us are:

  • A coloured bath you want in white
  • Thin, worn enamel in places
  • A period or roll-top bath worth keeping
  • A peeling or bubbling previous coating

Questions to ask before you book

  • What the guarantee covers, and for how long
  • Whether a trained technician does the job
  • What aftercare is recommended
  • Whether cleaning and preparation are in the price

10 questions to ask before you book

About our bath re-enamelling in Yondertown

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for an outdated colour you’d like to change and brown or grey marks that don’t clean off, in acrylic baths, Victorian roll-tops and basins & shower trays.

You get a one-year guarantee, the same in Yondertown as everywhere else we work.

Where
Yondertown (PL21)
Area hub
Devon
Warranty
One year on every repair
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

How it works

Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes the best part of a day in most cases. The room is left tidy.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can normally be used the next day.

How to prepare

  • Point us to the nearest place to park
  • Let us know about parking or access
  • Mention any earlier repairs or resurfacing

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.

Send photos for a quote

Read more

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Don’t use the bath until it has fully cured
  • Get any chip repaired quickly
  • Wash away dyes and oils after use
  • Keep suction mats out of the bath

Dry the bath after use if possible, and rinse away any product left on the surface.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • Damage hidden under a previous coating, until it’s stripped back
  • Leaks from fittings rather than the bath
  • A bath that’s rusted through

Send us photos and we’ll tell you honestly.

What we work on

  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.

Repairing versus replacing in Yondertown

If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Why us?

  • A fixed quote before you book
  • One visit for most repairs
  • Dust sheets down, tidy finish
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our pricing and guide to resurfacing and replacement costs.

What bath re-enamelling costs

Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:

  • Where the damage is and how we get to it
  • How many items we do on one visit
  • The material
  • Unusual colours or finishes

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Getting a price from pictures

A couple of clear pictures is all it takes. Try to include:

  • Any earlier repairs or coatings
  • A clear, close picture of the problem area
  • Where you are, by postcode
  • What it’s made of, if you know

Upload a photo of the damage and one of the entire item, with your PL21 postcode, and we’ll come back with a fixed quote.

FAQs for Yondertown

What areas do you cover?

Everywhere in the UK, Yondertown included. There’s no extra charge for travel.

What happens next?

You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

Is there a call-out fee?

We do not add a call-out fee. Your fixed price includes everything.

Can I add another job to the visit?

Of course, and it generally saves money. Just add the extra items to your pictures and we will quote them together.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Will there be fumes?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Where we work around Yondertown

Yondertown is about 7 miles east of Plymouth, in Devon. From the centre of Yondertown to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 586 places across Devon, from the larger towns to small villages.

Postcode districts we cover here: PL21. We also travel to Lutton (1 mile north-east), Corntown (1 mile east), Cornwood (1 mile north-east), Sparkwell (1 mile south-west) and Lee Mill (2 miles south). Further out, we also cover Tavistock (12 miles north-west), Ivybridge (3 miles south-east), Totnes (13 miles east), Kingsbridge (13 miles south-east), Bridgetown (13 miles east) and Salcombe (15 miles south-east).

Landmarks near Yondertown

Our customers here include homes close to Church of St Michael, Mountain Inn and Cornwood Church of England Primary School. The closest station to Yondertown is Ivybridge station, about 3.7 miles south-east of the centre. Further afield, we also cover the area around Moorhaven Hospital (4.5 miles east). Not far away are Crown Hill Down.

Map of Yondertown © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.