Peterborough · England
Bath Repair in Ailsworth
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Ailsworth and across Peterborough. Send pictures for a free, fixed quote.
- Repairs from £95
- Chips under the taps
- Deep scratches in acrylic
How we handle bath repair in Ailsworth
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. Whether it’s a chipped rim or side and rust by the waste and overflow, we can generally put it right, on cast iron enamel, roll-top & freestanding and whirlpool & spa baths alike.
All our work comes with our one-year guarantee.
- Where
- Ailsworth (PE5)
- Area hub
- Peterborough
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Once the work has cured, treat it gently:
- Rinse the bath after use, especially in hard water areas
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Check that an acrylic bath doesn’t move when you stand in it
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
How we price bath repair
Repairs from £95. You’ll know the full cost before booking. We look at:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How hard the colour is to match
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can usually get a fixed price without us visiting. To help us price it:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- A photo taken from further back
- Any details about the material
Most clients in Ailsworth get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Peterborough and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Landlords, letting agents and housing providers in Ailsworth use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What a repair cannot fix
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we will say what we think.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Ailsworth: your questions answered
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
About Ailsworth
Ailsworth is about 4 miles west of Peterborough, in Peterborough. Across the PE5 area, a technician comes to you. Ailsworth is one of 18 towns and villages in Peterborough we cover. Our nearest city page is Birmingham, about 65 miles away.
Every address in PE5 is covered. You will find streets such as Station Road, Main Street and Singerfire Road. Neighbouring places we cover include Castor (1 mile south-east), Water Newton (1 mile south-west), Sutton (1 mile west), Stibbington (2 miles west) and Alwalton (2 miles south-east). Within a short drive, we also cover Peterborough (4 miles east), Woodston (4 miles east), Stanground (6 miles east), Westwood (3 miles east), Eastfield (5 miles east) and Eastgate (5 miles east).
Near you in Ailsworth
In Ailsworth, that means homes near Castor CofE Primary School, Church of St Kyneburgha and Wheatsheaf Public House, among other places. The closest station to Ailsworth is Peterborough station, about 4.2 miles east. Nearby you will also find Edith Cavell Healthcare Campus (3.1 miles east) and Peterborough Castle (4.7 miles east). Green spaces nearby include Castor Hanglands National Nature Reserve and Orton Mere.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Nearby places to Ailsworth
What else we do in Ailsworth
Common problems we fix in Ailsworth
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
These are the problems we are asked about most:
- Cracks in an acrylic bath
- A failed DIY repair that’s discoloured or lifting
- Impact holes in acrylic
- Snagging damage from a refit
Comparing quotes
- How the room is protected while they work
- Who turns up on the day
- How changes to the job are handled
- When it can be used again
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take two to three hours for most chips, and we leave the room as we found it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Let us know about parking or access
- Have a window or extractor fan available
- Ensure the area is dry
Ask for a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say right away whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
