North Lanarkshire · Scotland

Bath Repair in Airbles

Problem with your bath in Airbles? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Snagging damage from a refit
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Airbles homes

What we are called out for in Airbles

A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move.

These are the problems we’re asked about most:

  • Holes from dropped items
  • Scuffs and scratches in the surface
  • Damage done while the bathroom was being fitted
  • A failed DIY repair that is discoloured or lifting

Questions to ask before booking

  • How soon you can use it again
  • A fixed price, and whether VAT is included
  • What aftercare is recommended
  • What happens if the damage is worse than the pictures show

10 questions to ask before you book

Bath repair at your home in Airbles

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. Common call-outs are for damage beneath the taps and chips caused by builders, in acrylic, roll-top & freestanding and whirlpool & spa baths.

Big or small, you get the same one-year guarantee.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Airbles (ML1, ML3)
County
North Lanarkshire
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026

What affects the price in Airbles

Prices start from £95. There is no area surcharge for Airbles. What changes the price is:

  • Whether we combine several jobs
  • Where the damage is and how we get to it
  • What kind of damage it is
  • Any earlier repairs that need removing first

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your pictures

The better the photos, the more accurate the price. Here’s what helps:

  • Your postcode, so we can check dates
  • The material, if you know it
  • A clear, close picture of the problem area
  • Any earlier repairs or coatings

If you are in Airbles and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Airbles and nearby

Airbles is about 1 mile south-west of Motherwell, in North Lanarkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Airbles is one of 89 places in North Lanarkshire we cover. Our jobs stretch from Airbles to Glasgow (about 12 miles away).

Our technicians cover all of ML1 and ML3. That includes homes on Camp Road, Manse Road and Mason Lane and the roads around them. Other places close to Airbles include Motherwell (1 mile north-east), Muirhouse (1 mile south-east), Ravenscraig (1 mile north-east), Netherton (2 miles south-east) and Pather (3 miles east). Within a short drive, we also cover Cumbernauld (12 miles north), Coatbridge (5 miles north), Airdrie (6 miles north), Bellshill (3 miles north-west), Kilsyth (14 miles north) and Burnfoot (6 miles north).

What’s near Airbles

Around Airbles, we work in homes near Duchess of Hamilton Park, Dalziel High School and Motherwell, among other places. You’ll also find Ladywell Primary School (0.7 miles north-west) and Public House (0.6 miles north). Airbles has its own railway station: Airbles station. A little further out are Brandon Shopping Centre (0.5 miles north) and University Hospital Wishaw (2.1 miles east). Green spaces nearby include Strathclyde Loch and Baron's Haugh RSPB Reserve.

Map of Airbles © OpenStreetMap contributors

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Cover the bath during DIY or decorating
  • Have new chips seen to early
  • Keep abrasive pads and gritty cleaners away from the bath
  • Stick to mild cleaners and a soft cloth

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

When a repair isn’t the answer

Not everything can be repaired, and we will tell you before we start. We cannot fix:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A bath worn all over, where resurfacing makes more sense
  • Leaking fittings, which need a plumber

If in doubt, send pictures and we will say what we think.

Materials we work on in Airbles

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic

Repair or replace in Airbles?

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Airbles. The job itself decides the price: the material, the amount of damage and how many items.

Why Airbles customers choose us

  • We will tell you if it’s not worth repairing
  • Dust sheets down, tidy finish
  • Nothing taken out or refitted
  • No extra charge for your area

See our prices page and resurfacing vs replacement cost guide.

The process

On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, usually by the next day, the bath is ready to use.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive

Get a quote

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

Send photos for a quote

Related advice

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Common questions in Airbles

Can you repair something that is been repaired before?

Generally, yes. Tell us what was done before and we will plan for it.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

Can I get a quote without a visit?

Nearly always. If photos don’t show enough, we will ask for another angle.

Is a cracked acrylic bath repairable?

Usually, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.

Is there any odour?

Expect a mild smell while we are working.

Is a repair better than a new one?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

How invisible is a bath repair?

On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

Can you fix rust around the plughole?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.