Wolverhampton · England
Bath chip & crack repair in Aldersley, Wolverhampton
Local bath repair for Aldersley: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Impact holes in acrylic
- Scuffs and scratches in the surface
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
About our bath repair in Aldersley
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. If you are dealing with a hole punched through by something heavy and chips caused by builders, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Aldersley (WV6, WV98, WV8)
- Area hub
- Wolverhampton
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Aldersley
A cracked acrylic bath typically wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex.
Contact us if you’ve noticed any of these:
- Rusty patches near the plughole
- A hole punched through by something heavy
- A failed DIY repair that’s discoloured or lifting
- Snagging damage from a refit
What your quote should include
- How long it needs to cure
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- What aftercare is recommended
Nearby places to Aldersley
Also in Aldersley
Our work in Aldersley
Aldersley is about 1 mile north-west of Wolverhampton, in Wolverhampton. From the centre of Aldersley to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Aldersley is one of 96 places in Wolverhampton we cover. You can also see our page for Birmingham, about 14 miles away.
Postcode districts we cover here: WV6, WV98 and WV8. Jobs here include addresses on Court Road, Sandy Lane and Green Lane and the roads around them. Neighbouring places we cover include Claregate (1 mile north-west), Gorsebrook (1 mile east), Oxley (1 mile north-east), Pendeford (1 mile north) and Fallings Park (1 mile east). We also work in nearby towns such as Bilston (4 miles south-east), Coseley (5 miles south-east), Wednesfield (3 miles east), New Invention (5 miles east), Gornal (6 miles south) and Tibbington (6 miles south-east).
Near you in Aldersley
We visit homes around St Peter's Collegiate School, Claregate Primary School and Wolverhampton Girls' High School, among other places. You’ll also find Church of St Michael and All Angels (0.5 miles south-west), The Pilot pub (within half a mile north-west) and West Park (1.1 miles south-east). The nearest railway station is Wolverhampton station, roughly 1.7 miles south-east of the centre. Well-known places in the area include Wolverhampton and Midland Counties Eye Infirmary (1.3 miles south) and Mander Centre (1.6 miles south-east). Open spaces near Aldersley include Beacon Hill and Peascroft Wood.
FAQs for Aldersley
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you cover the entire of Wolverhampton?
We work UK-wide. Our prices are the same everywhere.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Aldersley use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Aldersley
- CHAS and Constructionline accredited
- No need to remove anything
- Colours mixed by hand to suit your surface
- One visit for most repairs
Read our pricing or guide to resurfacing and replacement costs.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Open a window if you can
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Keeping it looking good
So the finish stays in good condition for years:
- Protect the bath with a towel when doing jobs nearby
- Don’t leave a fresh chip for long
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
